Advertisement
D-Link Co.,_______________________________________________________________________ FAQ
Action Not Matched= Forward
Menu 21.1.2 - TCP/IP Filter Rule
Filter #: 1,3
Filter Type= TCP/IP Filter Rule
Active= Yes
TCP Estab= N/A
More= No
Action Matched= Drop
Action Not Matched= Check Next Rule
Menu 21.1.2 - TCP/IP Filter Rule
Filter #: 1,4
Filter Type= TCP/IP Filter Rule
Active= Yes
TCP Estab= N/A
More= No
Action Matched= Drop
Action Not Matched= Forward
Part III:
Troubleshooting Questions
1.
My connection won't stay down.
The Router comes with several pre-defined call filters designed
to prevent certain IPX packets from triggering a call to a remote
node.
These filters should inform your Router which packets
should be ignored as traffic.
If you are routing IPX packets, the default call filters are
defined as follows:
IP Protocol=
6
IP Source Route= No
Destination:
IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 0
Port # Comp= None
Source:
IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 138
Port # Comp= Equal
Log= None
IP Protocol=
6
IP Source Route= No
Destination:
IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 0
Port # Comp= None
Source:
IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 137
Port # Comp= Equal
Log= None
How can I prevent this?
FAQ: 18
Advertisement
