Teledyne Foxy R1 - R2
4.6 DataApex UNI Setup
The appearance of the
presence of the selected Ruby Script - if the script is not present, only the
Ruby Script field is visible.
Ruby Script
Displays
TELEDYNEISCOFOXYRXFC.RB script for the Teledyne Foxy R1 - R2
instrument can be found in the UTILS/UNI_ DRIVERS/ TELEDYNE
subdirectory (accessible through the
installation folder (C:\CLARITY\BIN by default).
Port
Defines the communication port used, possible values dependent on the
type of communication of the device and/or available ports in the PC.
AutoDetect
It is used for verifying the device communication over the serial port
selected above.
Communication Type
Here you can select either the Serial or TCP/IP communication protocol.
If the TCP/IP communication is selected the port 23 shall be used for such
communication.
Instrument Name
Allows you to set the custom name of the instrument. This name (entered
into the Value column) will be used throughout the Clarity station.
Device Type
Displays the subtype of the fraction collector.
DataApex UNI Setup
Fig 11: Teledyne Foxy R1 / R2 Setup
the
selected
4 Using the control module
dialog depends on the
Ruby
Script.
button) of the Clarity
- 18 -
The
correct