Table of Contents
Advertisement
Teledyne Foxy R1 - R2
4.1 Method Setup - FC - Fraction Table
The
Method Setup - FC - Fraction Table
automatic fraction collection program of the Teledyne Foxy R1 - R2
fraction collector. The actions of the fraction collector can be displayed in
Data Acquisition
button on the graph, choose Properties... to open the
dialog and check the
Flow Rate
Sets the flow rate of the liquid phase going to the fraction collector. This
parameter, together with the Fraction Volume parameter from the Fraction
Table , helps to prevent collection vial overflowing. Flow rate units are
taken from the
Delay Volume Detector - Valve
Sets the volume of the tubing between the detector and waste/collect
valve of the fraction collector. Volume units are devised from the Flow
Rate Units set in the
The delayed volume is displayed in the
vertical line trailing the signal front.
Delay Volume Valve - Vial
Sets the volume of the tubing between the waste/collect valve and the vial
in the fraction collector tray. Volume units are devised from the Flow Rate
Units set in the
window or
Chromatogram
Show Events
Fig 5: Method Setup - FC - Fraction Table
Units Setup
dialog.
Units Setup
Units Setup
tab is used for setting the
window, click the right mouse
option.
dialog.
Data Acquisition
dialog. If the fraction collector has no
- 7 -
4 Using the control module
Graph Properties
window as a
Advertisement
Table of Contents
