Opening The Burner; Closing The Burner - Riello RS 300/EV FGR Installation, Use And Maintenance Instructions

6.3

Opening the burner

Disconnect the electrical supply from the
burner.
DANGER
➤ Remove the tie rod 1)(Fig. 38) of the head movement lever,
loosening nut 2);
➤ disconnect the gas servomotor test point 3);
➤ disconnect the gas pressure switch test point 4);
➤ remove screws 5).
➤ At this point it is possible to open the burner at the hinge.
6.4

Closing the burner

➤ Close the burner at the hinge and apply screw 5);
➤ connect the gas pressure switch test point 4);
➤ Connect the gas servomotor test point 3);
➤ apply the tire rod 1)(Fig. 38) of the head movement lever, loos-
ening nut 2).
➤ Connect the electrical supply from the burner.
Maintenance
D3818
39 GB
5
5 3 4
5 1
2
5
Fig. 38
20037075