Other Connection; Speed Sensor Adjustment - Riello RS 300/EV FGR Installation, Use And Maintenance Instructions

It is very important to shield the motor cable 1) as
shown in Fig. 25.
WARNING
1
D9538
Key (Fig. 25)
1 Motor supply cable
2 Single phase supply cable

4.12 Speed sensor adjustment

The measurement of speed sensor 1)(Fig. 27) must
be respected!
WARNING
It is important that the disc 2) is installed on the
burner as shown in the Fig. 27.
WARNING
20037075
Installation
D9535
2
Fig. 25
32 GB

4.11.1 Other connection

1 The connection from the Inverter to LMV52.... must be done
as shown in Fig. 26.
2 The connection from the speed sensor to LMV52.... must be
done as shown in Fig. 26
3 Possible pressure/temperature probes and O
nection must be done as shown in Fig. 26.
sensor con-
2
Fig. 26
D11388
20072222
Fig. 27