Collection Without Grassbag; Heavy Growth; Friction Disc; Non Grassed Areas - Hayter Harrier 48 PRO Owner's Handbook Manual

OPERATING THE MOWER

Collection Without Grassbag

Remove the grassbag and operate the mower with the rear
defl ector in the closed position.
(Refer fi g.20)

Heavy Growth

Areas of heavy growth should be mown without collecting the
clippings. If collection is required, fi rst mow the area without the
grassbag at the maximum height of cut setting.
Allow the grass clippings to dry out and then mow the area at the
maximum height of cut setting with the grassbag fi tted.
Reduce the height of cut and mow the area again as necessary
until the required fi nish is obtained.
To prevent damage to your lawn do not remove more than one
third of grass height in one cut.
(Refer fi g.21)

Friction Disc

The cutterblade is driven by the engine via a friction disc to
help prevent damage occurring to the engine crankshaft and
cutting mechanism when a hidden obstruction or overload is
encountered.
(Refer fi g.22)
Fig. 20 Fig. 21
Always stop the engine when a hidden obstruction or
excessive vibration is encountered. Disconnect the spark
plug lead and examine the cutting mechanism. ALWAYS
replace a damasged cuttereblade. Refer to Maintenance.

Non Grassed Areas

When moving the mower across non-grassed areas, stop the
engine and set the mower to the maximum height of cut to
protect the cutting mechanism.
(Refer fi g.21 & 22)
Fig. 22
11