BT 1250 Classic User Manual page 28

Intercom
Press the
Press the
C OK
the screen.
Press the
2
Press the
4
Press the
1
The access code is displayed.
Press the
C OK
Enter or correct the switchboard
external line access code, e.g. .
You can enter codes up to 8 digits in
length.
Press
C OK
C OK
Press the
C OK
C OK
Intercom
Press the
Press the
C OK
the screen.
2
Press . Press . Press .
4
2
The number of digits is displayed.
Press the
C OK
28
button.
button. F1 will appear on
button.
button.
button.
button.
to store.
button three times to exit.
button.
button. F1 will appear on
button.
Enter or correct the number of digits
you dial to make internal calls to
other extensions on your switchboard.
Press the button three times to exit.
C OK
For the external line access code to be dialled
for external calls only, it is important that all
external numbers stored in your handset
directory must contain more digits than the
number of digits required to make an internal
call to other extensions on your switchboard.
This is most likely to occur when you have
local external numbers stored in the handset
directory without the area code. To overcome
potential problems ensure that all numbers
are stored complete with area code.
Intercom
Press the
Press the button. F1 will appear on
C OK
the display.
Press the button.
2
Press the button.
4
Press the button.
3
Use the or
to de-activate, or
Press to store.
C OK
C OK
Press the button three times to exit.
C OK
C OK
button.
button to select
to activate.