Access Code - BT 1250 Classic User Manual

On-Air 1250 Classic user guide ~ 1st Edition ~ 7th August '01 ~ 4073
To use call screening
You can decide whether to listen to
incoming messages over the
loudspeaker and answer them or let
your answer machine take the
message.
Alternatively you can choose not to
hear the callers messages.
Call screening is off by default.
You can intercept the call at any time
and speak to the caller by pressing
the GREEN PHONE button.
To set up call screening:
Intercom
Press the INTERCOM button.
Press the OK button.
C OK
Press the 4 button.
4
Press the 5 button.
5
L
Use the UP or DOWN button to
M
scroll to either 0 to switch off or 1 to
switch on.
Press the OK button to confirm.
C OK
Press the C button to return to idle.
C OK
20
VIP
VIP feature
When the answering machine is
switched on, this feature allows you to
still receive calls on your handset(s)
by privileged callers who you have
given the VIP code to.
When the VIP feature is switched on
your handset will not ring when a call
is received. When the caller hears the
outgoing message they can enter
followed by your VIP code to make
your handset ring.
To set up and change the VIP

access code

(You must change the code from the
default setting of 0000 for this to
work.)
Intercom
Press the INTERCOM button.
Press the OK button.
C OK
4
Press the 4 button.
Press the 6 button.
6
OLD
Enter your old four digit access code.
CODE
NEW
Enter your new four digit access code.
CODE
CONFIRM
Re-enter your new four digit access
CODE
code.
Press the C button twice to return
C OK
to idle.
✱