Table of Contents
Advertisement
System Setup
System Clock Settings
1.Enter the System Setup mode.
2.In the system setup control bar menu, use the
press the
SELECT
button. OSD will display the Time Settings dialog box, as shown in the following chart.
System Setup Time
Date (mm/dd/yy)
Time (HH: MM: SS)
1
3.Press the
SELECT
button to select the
Date (MM/DD/YY)
number buttons to enter the date as
MM/DD/YY
4.Press the
and SELECT
buttons to select the
Use the number buttons to enter the time as
HH: MM: SS
System Setup Time
Date (MM/DD/YY)
Time (HH: MM: SS)
1
5.Press the
Return button to return to the upper level menu and setup other items. Or, press the Setup
button to finish the settings and exit.
* The correct setup of system clock is the prerequisite for timer recording.
Other Operations
Standby
1.In the normal working status, press the red button
the Standby status.
In the Standby status, the VFD will display current time as a clock. For the clock adjustment, please see
System Setup: System Clock Settings
In the Standby status, the red Standby LED on the front panel is ON.
To prevent damage, the operation is disabled when the unit is writing or erasing a disc.
2.Press the
STANDBY/ON
button on the front panel or the remote controller again, the system will
resume working.
In the normal status, the red Standby LED is OFF.
or
button to move the cursor to the
CLOCK
01/01/00
14:06:11
item and highlight the input field. Use the
and press the
SELECT
button to confirm.
Time (HH: MM: SS)
item and highlight the input field.
and press the
SELECT button to confirm
01/01/00
14:06:11
STANDBY/ON
of the remote controller to enter
43
Table of Contents
System Setup
Operation Interface and General Steps
GENERAL Settings
Screen Save
item and
Progressive/Interlase
Video Output Format
Restore Factory Settings
PLAYBACK Settings
TV aspect ratio resttings
Rating level
Digital Audio Output
Analog Audio Output
RECORD Settings
Automatic Chapter Marker
Recording Quality
LANGUAGE Settings
OSD Language
Menu Language
Subtitle Language
Audio Language
CHANNEL SCAN
SYSTEM CLOCK Settings
Other Operations
Standby
Appendix
Troubleshooting Guide
Technical Specifications
4
34
34
35
35
35
35
36
36
36
37
37
38
38
38
38
39
39
39
40
40
42
42
43
44
Advertisement
Table of Contents
