Table of Contents
Advertisement
System Setup
PLAYBACK Settings
1. Enter the System Setup control menu.
2. Use the
or
button to select the PLAYBACK
3. Press the SELECT
button to enter the Play Setting
mode. The following chart is the Play Setting main menu.
Note
This setup can be done only in the No Disc or stop mode
TV aspect ratio Settings
1.In the Play Settings menu, press the
SELECT
menu, as shown in the above chart.
2.Use the
or button to select a proper setting value, and press the SELECT
The values to be selected in this setting are explained as follows.
16:9 is suitable for a wide screen TV.
Pan Scan is suitable for a TV with ordinary screen size. When a wide screen picture is played, the left and right
margin will be cut and the picture will occupy the entire screen.
Letter Box, use this for ordinary TV. When a wide screen picture is played, a black frame will appear at the top
and bottom of the TV screen.
The default value is Letter Box.
3.Press the RETURN button to return to the upper level menu and set up other items.
Note
The playing effect depends on the recorded picture size. Some picture might not be played according to the
screen format you select.
For those discs recorded as 4:3, no matter how the screen format is set, the screen format played is always 4:3.
The selection of screen format shall be in accordance with the TV screen.
Rating Level
With the setting of the authorization level and password of
the unit, some discs which contain restricted content are only
playable after the input of password. This function enables you
to restrict the unit to play some discs which are not suitable for
children.
1. In the Play Settings menu, use the
or
button to move the cursor, select the Rating Level item, and press
the SELECT button. Then the OSD displays:
2. Enter the password, and press the SELECT button. The TV screen will display the dialog box as shown in
the right chart.
The super password is 3308.
item.
System Setup PLAYBACK
TV aspect ratio
Pan Scan
Rating level
Off
Digital Audio Output
RAW
Analog Audio Output
5.1 CH
1
.
button to select the TV aspect ratio item and drop down a
button to confirm.
System Setup PLAYBACK
TV Screen Format
Pan Scan
Parental
Off
Enter the password:
Digital Audio Output
Onglnal Code Value
****
5.1 Channels
Analog Audio Output
1
OK
Cancel
37
How to install and use the remote controller
Notes:
Do not drop the remote controller or leave it in places of high humidity.
Do not leave the infrared ray receiver barely in sunlight or bright light.
Please change the batteries of low electricity in time. And do not mix new and old batteries together. Try not to
use rechargeable batteries.
USB
DV INPUT
STANDBY/ON
OPEN/CLOSE
STANDBY/ON
PS/IS
SCAN
MUTE
3
4
1
2
5
6
7
8
DISPLAY
GOTO
9
0
MENU
ZOOM
SELECT
AUDIO
SETUP
ANGLE
SUBTITLE
TITLE
SLOW
+
VOL
REPEAT
PROG
RANDOM
RETURN
P
P
PREV
NEXT
DV
TV
SOURCE
REV
PLAY
FWD
REC/OTR
STOP
PAUSE/STEP
CHANNEL
/ /
OPEN/CLOSE
RECORD
10
Advertisement
Table of Contents
