Table of Contents
Advertisement
Table of Contents
Erase Disc
Lock Disc
Rename Disc
Record a New Title
Overwrite Disc
Finalize Disc
Exit
Title Edit
Introduction
Enter the Title Editing mode
Play Mode
Enter the Play Mode
Menu Description
Operation
Direct Play
Enter the title before playing
Enter Menu before playing
End Play
Play Mode Control
Normal Play
Repeat Play
Program Play
Random Play
Play Process Control
Menu Control
Forward Play
Back Play
Pause/Step Play
Volume Control
Selected Play Mode
Title Selection
Chapter Selection
Track Selection
Track Selection play for Audio Discs
Time Selection
The Use of
GOTO
Button
Audio Selection
Audio Channel Selection
Subtitle Selection
Multi-angle Switch
PBC On/Off
Picture ZOOM Function
Play a USB DISC
31
31
31
32
32
32
33
33
33
33
34
3
Appendix (Troubleshooting Guide)
22
Before contacting service personnel, please check possible causes according to the following instructions.
22
23
Symptom
23
23
23
No Power
23
24
No sound
24
No picture
24
24
25
25
No color
26
26
26
27
Disc cannot
27
be played
27
28
28
29
29
Remote controller
29
malfunction
29
30
30
30
Sudden malfunction
30
30
Picture dividing
External signals
cannot be recorded
No monitoring signal
Timer recording
cannot be done
Recording
aborted halfway
Possible Cause
1.Power supply not connected;
1. Connect to the power supply.
2.Bad contact between the power plug
2. Plug again or replace a receptacle.
and the receptacle;
3. Switch on the receptacle.
3. The power of the receptacle is off.
1. Connect the signals properly.
1.Incorrect signal connection;
2. Clean or fix the disc.
2.The disc is deformed or get dirty;
3. Press the
3. The system is in the mute status.
1. Incorrect signal connection;
1. Connect the signals properly.
2. Incorrect TV status.
2. Adjust the TV/AV status.
3.TV system out mode is Progressive.
3.Press PS/IS change to Interlace.
But your TV system is Interlace mode.
1. Set up the system by pressing the
1. Wrong selection of TV system;
button of the remote controller.
2. Improper color adjustment;
2. Readjust the color.
3. Incorrect video output settings
3. Check if the video output settings are correct.
1. Insert a disc;
1. No disc in the drive;
2. Put the disc on the disc tray properly
2. Disc placed wrongly;
with the label side up.
3. Moisture has condensed in the unit;
3. Leave the unit on for about an hour
4. Not in a playing status;
(without disc) and before using it again.
4. Press the
5. Wrong disk format;
Playing status.
6. Disc is dirty.
5. Replace it with a supported disc.
6. Clean the disc with a soft cloth from the
centre to the edge.
1. The remote controller is not directed at the
1. Direct the remote controller at the
censor;
censor.
2. The receiving distance is more than 8 meters;
2. Reduce the receiving distance.
3. Low voltage of the RC batteries;
3. Replace all the batteries.
4. There is an obstacle between the unit and RC.
4. Remove the obstacle.
1. Wait for 5~10 seconds and the playing
1. Bad disc quality;
will be restored.
2. Press other buttons by mistake;
2. Operate again.
3. Static from the outside.
3. Shut off the unit for 1-2 minutes and
open it again.
1. The selected system is incompatible
1. Set up the correct system.
with the disc;
1. Incorrect system connection;
1. Connect properly.
2. No disc or non-recordable disc;
2. Insert a recordable disc.
3. The disc has been finished;
3. Replace a disc.
4. There is no free space in the disc.
4. Replace a disc.
1. Input source not prepared;
1. Prepare the input source.
2. Wrong video output system;
2. Switch the video output system.
3. The actual input source is not
3. Select a proper input source.
correspondence with the selected one.
1.The disc does not meet the requirement;
1. Replace it with a new DVD+R or
2. Wrong time settings (System Clock or
DVD+RW disc.
Recording Time);
2. Set up the time again.
3. The input source doesn't work properly
3. Ensure the inputs source work properly
at the recording time;
at the recording time.
4. System power failure.
4. Set the system to standby status.
1. There is no free space in the disc;
1. Replace it with a blank disc.
2. Bad disc quality.
2. Replace it with a high quality disc.
44
Remedy
Mute
button again.
System
Play
button to switch to
Advertisement
Table of Contents
