System Connection For Recording External Signals; Standby - Curtis DVD2100 User Manual

System Connection
System connection for recording external signals (front panel signal
When connecting with external signals, be sure to switch off the power source of the unit and other devices.
The connection with front panel inputs
The thick side
is downward
USB DV INPUT
STANDBY/ON
NOTE
Refer to the manual of the connected system.
Turn off the power and unplug both units before
setting up any connections.
System connection for recording external signals (rear panel signal input)
Connection using rear panel inputs
RF Input
Audio lnput
or
DVD Player
From the video input terminals, select one as desired. In terms of picture quality, CVBS stands for good,
S-VIDEO for better and Y/CB/CR for best.
DIGITAL
Vidicon
RECORDER FRONT
OPEN/CLOSE RECORD
13
Play Mode
Play a USB DISC
Insert the USB disc, the unit will detect it automatically and display a
of the TV screen for a second.
In the DV Mode, press the DV button, or in the NAVIGATION Mode, to switch to USB Play Mode.
The unit will automatically identify the files in the USB DISC. The playable formats of the unit include:
*.MP3, *.WMA, *.JPG.
Press the , and SELECT buttons to select an item to play.
Press the , and ADD/CLEAR buttons to select the Program Play. (Note: In the Program Play mode,
audio files such as *.MP3 and *.WMA and video files such as *.JPG cannot be programmed at the same time.
That is, if the program includes audio files, the video files cannot be programmed).
When finishing playing, the USB DISC can be unplugged directly. (Note: Do not unplug the USB disc while
it is playing).
symbol in the lower right corner
File Play Stop 0 00 08-0 01 48
File Favorite/Program
01.MP3
MP3
02.MP3
03.MP3
04.MP3
05.MP3
06.MP3
07.MP3
08.MP3
09.MP3
34