Table of Contents
Advertisement
Recording Mode
Introduction
There are various external signal inputs in the unit, including S-Video, composite video, TV tuning , DV input
and stereo audio input. You can select any group of audio and video signals from these inputs for recording.
The recording discs of the unit include DVD+RW and DVD+R. There are four available recording modes of
different quality, including SLP (6 hours), EP (4 hours), SP (2 hours) and HQ (1 hour).
The unit has a function of timer recording. You can set up a recording schedule in advance. The unit will record
the programs that you select automatically. If the unit is connected with a DV camera, you can also conduct a long
time recording to monitor a certain location in an automatic and intelligent way.
Entering the recording mode and menu description
To enter the recording mode, take the following steps:
1. In the Non-rewritable Disc mode, press the
The Monitoring Mode can be regarded as a sub-mode of the Recording Mode.
2.The system will automatically enter the Recording Mode when the setup time is reached.
For details about timer recording, see
Timer Recording
3.In the Recording Mode, press the
DISPLAY
The meanings of various options in the recording control bar menu are as follows.
1) The disk format must be DVD+RW or DVD+R.
2) Mode.
3) Recording Input Source.
4) Recording Quality.
5) REC TO: DVD+VIDEO.
6) Recording Process Control (STOP, PAUSE and RECORD).
7) Number of Recorded Titles.
8) Number of Recorded Chapters.
9) Recordable Time Left.
General Steps
The general steps for recording external signals are as follows.
1. Complete the system connection.
2. Select the signal source to be recorded.
3. Enter the recording control bar menu.
4. Select the recording quality.
5. Start recording.
6. Stop recording
SOURCE
button to enter the Monitoring Mode.
for reference.
button to show or hide the recording control bar menu.
Record (DVD+R)
1
Mode
New Title
2
Source
DV
3
Quality
SP
4
REC TO
DVD+VIDEO
5
TRICK
Record
6
7
Title
04/04
8
Chapter
02
9
Time
0:06:02/1:57:18
15
Play Mode
The Use of the
GOTO
Button
1. In the playing status, press the
GOTO
button to cycle through various options in the play control bar menu.
With the above-mentioned operations, you can use the remote controller to enter the corresponding value and skip
to the corresponding location directly.
The following is an example of DVD playing. The operation of VCD playing is similar to this case.
For CD and MP3 discs, it is no use pressing the
CHAPTER:--
TITLE:--
DVD
D-TIME:--
VCD
Audio Selection
Some DVD discs may have more than one OSD language. You may select one of them as the output.
1. In the play control bar menu, select the Audio item.
There are some digits under the icon. The number on the
right is the total number of OSD languages; the one on the
left is the number of the current mode.
2.Press the SELECT button, use the
or
button
to select the
Audio
item, and press the
SELECT
button of the remote controller to confirm.
3.This function enables you to switch between different
languages by pressing the
AUDIO
button directly.
Audio Channel Selection
This function is available for CD, VCD and MP3 discs.
1.In the play control bar menu, press the
or
button
to select the
Audio
item, press the
SELECT
button to confirm and enter the input mode.
2.Use the
or
button to select
Stereo , Right
or Left, and press the
SELECT
button to confirm.
3.This function enables you to switch between different
channels by pressing the AUDIO
button directly
GOTO
button.
TIME:--:--:--
TR-TIME:--:--:--
DVD
MODE
Normal
TRICK
Play
TITLE
01/01
CHAPTER
02/14
AUDIO
01/03-OTH
SUBTITLE
01/01-OTH
ANGLE
01/01
T- TIME
00:02:48-00:51:25
VCD
MODE:
Normal
TRICK:
Play
TRACK:
01/01
AUDIO:
Stereo
PBC:
ON
TR-TIME:
00:02:48-00:51:25
32
Advertisement
Table of Contents
