Table of Contents
Advertisement
Play Mode
Subtitle Selection
Some DVD discs may have more than one kind of subtitle. You can select one of them as the output.
1. In the play control bar menu, select the
Subtitle
There are some digits under the icon. The number on the
right is the total number of subtitle languages provided
by the disc; the one on the left is the current selection.
The default value can be set in the
System Setup .
If there is a word
Off under the icon, it indicates that
the subtitle is off. This value can be set in the
Setup .
2. Press the SELECT button to make the Subtitle item
available for selection.
3. Press the
or
button of the remote controller to select
the subtitle language, and press the
SELECT
confirm.
4. this function enables you to switch differe subtitle by
pressing the
SUBTITLE
button directly.
Multi-angle Switch
For some DVD discs, the pictures are shot from different
angles at the same time. While playing , yo u can vi ew f rom
different angles.
1.In the play control bar menu, select the
Angle
2.Press the SELECT button to make the
Angle
SELECT
button to confirm. Then the angle will be changed.
There are some digits under the icon. The number on the right is the angle of subtitle languages provided by the
disc; the one on the left is the current selection
3.Press the
ANGLE button to switch angles directly.
PBC ON/OFF (Available only for VCD 2.0 or above versions)
1.In the play control bar menu, select the PBC ON/OFF item.
2.Select the On
or Off value and press the SELECT button to enable or disable PBC function.
Press the MENU
button to enable or disable PBC function
directly.
Note
The so-called PBC function indicates the menu play
mode of VCD 2.0. When the PBC is on, the system will
provide a list of all tracks. You can select to play any of
these tracks using the number buttons of the remote
controller. When the PBC is off, the system will play the
disc in the normal order.
Not all VCD discs support PBC play.Picture Zoom Function
Picture Zoom Function
In the playing status, the unit has the function of zoom in pictures. (Available for DVD, VCD and JPEG)
1.In the playing status, press the ZOOM button, and the picture may enlarge by 150% or 200%.
2.After the picture is enlarged, use the arrow buttons
different parts of the enlarged picture.
item.
DVD
MODE
Normal
TRICK
Play
TITLE
01/01
CHAPTER
02/14
System
AUDIO
01/03-OTH
SUBTITLE
01/01-OTH
ANGLE
01/01
T- TIME
00:02:48-00:51:25
DVD
button to
MODE
Normal
TRICK
Play
01/01
TITLE
CHAPTER
02/14
AUDIO
01/03-OTH
01/01-OTH
SUBTITLE
ANGLE
01/01
T- TIME
00:02:48-00:51:25
item.
item available for selection. Enter a number and press the
VCD
MODE:
Normal
TRICK:
Play
TRACK:
01/01
AUDIO:
Stereo
PBC:
ON
TR-TIME:
00:02:48-00:51:25
,
,
or
to move the picture so that you can view
33
Monitoring Mode
Introduction
In Monitoring Mode, the system only displays external signals (CVBS,S-VIDEO,DV,TV) selected by the
user on the TV screen directly without conducting other operations. You can review the content of the external
signals in Monitoring Mode. This mode is for selecting the recording input source.
The Selection of Monitoring
Use the
SOURCE
to select monitoring signals.
1)
In Monitoring Mode, press the
SOURCE
the following chart:
Rear AV
TV monitor
1)
Press the
TV
button directly to enter the TV Input Signal Mode.
2)
Press the
DV button directly to enter the DV Input Signal Mode, press twice
USB mode.
3)
To select a TV channel, enter the channel number directly.
4)
For example, the channel number is 008, press 8 once, and then press
to enter automatically
5)
Press the
Channel +/-
button to switch channels.
Use the menu to select monitoring signals
Note:
Before receiving TV signals for the first time, please conduct the Channel Scan operation. For details, see
Setup: Channel Scan
for reference.
NAVIGATION Mode
The NAVIGATION Mode can realize all functions of the unit.
Mode Selection
Switch to Mode Play
1
2
3
4
5
6
button repeatedly to cycle through various input sources as shown in
Rear S
DV
DVD Play
DV
button directly enter
SELECT
to enter, or wait for 5 seconds
Press8
Press the
NAVIGATION
button of the remote
controller to display the screen on the left.
1 Switch to Playback Mode;
2 Switch to Recording Mode;
3 Switch to Editing Mode;
4 Switch to Disc Operation Mode;
5 Switch to System Setup Mode;
6 Switch to Timer Recording Setup Mode;
7 Switch to USB operation Mode.
7
14
System
Advertisement
Table of Contents
