Table of Contents
Advertisement
System Connection
Connected to a TV
Before the system connection, be sure to switch off the power source of this unit and other devices.
Cr
Cb
Y
Rear Panel of the Unit
TV
S-video
Video input
Audio input
lThere are three kinds of video outputs in the unit, namely component video, S-Video and composite video.
You can select one of the available video outputs of the TV and then make the connection.
lIn terms of picture quality, the component video is the best; S-Video comes next, while the composite
video is less satisfying.
lWhen connecting the audio output of the unit to the TV, connect the left and right audio outputs to the TV
audio inputs of the same group as the connected video inputs.
S-Video /Input
Video Input
11
System Setup
Screen Saver
The Screen Saver function means that when the unit is idle (or without monitored output) for some time, some
interesting picture screen saver pictures will appear automatically.
1. In the General Settings menu, use the
or
button to move the cursor and select the Screen Saver item.
2. Press the SELECT button and the Screen Saver item will drop down a list as shown in the chart.
3. Use the
or
button to move the cursor, and select ON or
OFF .
4. Press the SELECT button to enable or disable the Screen Saver
function.
When the screen saver appears, press any button to exit it.
7. Press the RETURN
button to return to the upper level menu
and set up other items.
Progressive/Interlace
1. In the General Settings menu, use the
or
ursor, select the
Progressive/Interlace
item and press the
SELECT
button.
2. Select the Progressive or Interlace option for video scan output
mode, and press the
SELECT
button to confirm.
* This function can do by press
PS/IS button in the remote controller.
Video Output Format
1. In the General Settings menu, select the Video Output Format
item and press the SELECT button to drop down a menu.
2. Select PAL or NTSC.
3. Press the SELECT button to confirm.
This setting must be in accordance with the TV system, Otherwise the
video output might not work properly.
Restore Factory Settings
1. In the General Settings menu, use the
or
button to select
the
Restore Factory Settings item and press the
button. The OSD will display as follows.
2. Use the or button to select OK .
3. Press the
SELECT
button to restore all default settings.
When your unit doesn't work properly, it may probably result
from some wrong settings. Please try the
Restore Factory
Setting function to see if the unit can restore to its normal
working status.
System Setup (General)
Screen Saver
ON
Progressive/Interlace
ON
Video Output Format
OFF
Restore Factory Settings
OK
1
System Setup (General)
button to move the
Screen Saver
On
Progressive/Interlace
Interlace
Video Output Format
Progressive
Restore Factory Settings
Interlace
1
System Setup (General)
Screen Saver
On
Progressive/Interlace
Interlace
Video Output Format
NTSC
Restore Factory Settings
PAL
NTSC
1
System Setup (General)
SELECT
Screen Saver
On
Interlace
Progressive/Interlace
NTSC
Restore Factory Settings
System will reset all setup
OK
item to the default values.OK
to confirm.Cancel to exit.
OK
Cancel
1
36
Advertisement
Table of Contents
