Table of Contents
Advertisement
Preface
Related Documents
You may also need to consult the following manual for additional information:
User's Manual on CD
This describes the notebook PC's features and the procedures for operating the computer and its ROM-based setup pro-
gram. It also describes the installation and operation of the utility programs provided with the notebook PC.
System Startup
1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Insert the battery and make sure it is locked in position.
4. Securely attach any peripherals you want to use with the computer
(e.g. keyboard and mouse) to their ports.
5. Attach the AC/DC adapter to the DC-In jack on the left of the
computer, then plug the AC power cord into an outlet, and connect
the AC power cord to the AC/DC adapter.
6. Use one hand to raise the lid/LCD to a comfortable viewing angle (do
not exceed 130 degrees); use the other hand to support the base of
the computer (Note: Never lift the computer by the lid/LCD).
7. Press the power button to turn the computer "on".
VIII
Figure 1
Opening the Lid/LCD/Com-
puter with AC/DC Adapter
Note that you should always
Plugged-In
shut your computer down
by choosing Shut Down
from the Start Menu.
This will help prevent hard
disk or system problems.
Shut Down
Advertisement
Table of Contents
