Starting / Stopping The Engine - Stihl FS 90 Instruction Manual

English
Starting / Stopping the
Engine
Operating elements
Control handle on handlebar
STOP- START
4 5 6
3
7
2
1 Throttle lever lock
2 Throttle trigger
3 Slide control
26
Control handle on shaft
2
1 Throttle lever lock
2 Throttle trigger
3 Slide control
1
Slide control positions
4 STOP-0 – engine off – ignition is
switched off
5 Operating position F – Run – engine
is running or can start
6 START – Start – the ignition is
switched on – the engine can be
started
Symbol on slide control
7 h – Stop sign and arrow – to switch
off the engine, push the slide control
in the direction of the arrow at the
stop sign (h) to STOP-0
Starting
7
N
4
N
N
5
3
N
6
1
N
g If the engine is cold
e If the engine is warm – even if the
N
Press the throttle trigger lockout and
throttle trigger in succession
Hold both triggers down
Move the slide control to START
and hold it in position too
Release the throttle trigger, slide
control and throttle trigger lockout in
succession = starting throttle
position
9
8
Set the choke knob (8)
engine has already run but is still
cold
Press the manual fuel pump
bulb (9) at least 5 times - even when
bulb is filled with fuel
FS 90, FS 90 R