Starting / Stopping The Engine - Stihl FS 70 Instruction Manual

English
Loosen the screw (3).
N
Floating position
Mowing heads and grass cutting
N
blades should just touch the ground.
Proceed as follows to adjust the floating
position:
Move the carrying ring up or down
N
the drive tube – tighten the screw
moderately – let the unit go and wait
until is its balanced – then check the
floating position.
22
When the correct floating position has
been reached:
Tighten down the screw on the
N
carrying ring firmly.
Detaching the unit from the harness
1
2
Press down the bar on the
N
carabiner (1) and pull the carrying
ring (2) out of the carabiner.
Starting / Stopping the
Engine
Controls
Version with Bike Handle
1
2
1 Throttle trigger lockout
2 Throttle trigger
3 Stop switch with Run and 0 = Stop
positions. Press the stop switch to
switch off the ignition – see
"Function of stop switch and ignition
system".
3
2
1
FS 70 C, FS 70 RC