Ordering Spare Parts - Stihl MS 650 Instruction Manual

English
Noise and Vibration Data
For further details on compliance with
Vibration Directive 2002/44/EC see
www.stihl.com/vib.
Sound pressure level L
peq
MS 650:
Sound pressure level L
peq
MS 660:
Sound power level L to ISO 22868
w
MS 650:
MS 660:
Vibration measurement a
hv,eq
ISO 22867
Handle,
left
2
MS 650: 6.7 m/s
2
MS 660: 7.0 m/s
The K-factor in accordance with
Directive 2006/42/EC is 2.0 dB(A) for
the sound pressure level and sound
power level; the K-factor in accordance
with Directive 2006/42/EC is 2.0 m/s
for the vibration level.
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
For information on compliance with the
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
46
Exhaust Emissions
The CO value measured in the EU type
2
approval procedure is specified at
www.stihl.com/co2.
The measured CO
to ISO 22868
determined on a representative engine
in accordance with a standardized test
100 dB(A)
procedure under laboratory conditions
to ISO 22868
and does not represent either an explicit
or implied guarantee of the performance
101 dB(A)
of a specific engine.
The applicable exhaust emission
requirements are fulfilled by the
115 dB(A)
intended usage and maintenance
described in this instruction manual. The
112 dB(A)
type approval expires if the engine is
to
modified in any way.
Handle,
right
2
6.7 m/s
2
7.0 m/s
2

Ordering Spare Parts

Please enter your saw model, serial
number as well as the part numbers of
the guide bar and saw chain in the
value was
spaces provided. This will make re-
2
ordering simpler.
The guide bar and saw chain are subject
to normal wear and tear. When
purchasing these parts, always quote
the saw model, the part numbers and
names of the parts.
Model
Serial number
Guide bar part number
Chain part number
MS 650, MS 660