Replacing The License Plate Light Bulb; Auxiliary Light - Yamaha 2010 YZF-R6Z Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
1. Screw
2. Remove the license plate light bulb
socket (together with the bulb) by
7
pulling it out.
EAU24313
1. License plate light bulb
2. License plate light unit
3. Remove the burnt-out bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by pushing it in.
6. Install the license plate light unit by
installing the screws.
7-37

Auxiliary light

1. Auxiliary light
This model is equipped with an LED-
type auxiliary light.
If the auxiliary light does not come on,
have a Yamaha dealer check it.
EAU44940