Yamaha 2010 YZF-R6Z Owner's Manual page 29

G
The indicator light will flash
when activated. (This setting
is selected when the indicator
light flashes four times per
second.)
G
The indicator light is deacti-
vated; in other words, it will
not come on or flash. (This
setting is selected when the
indicator light flashes once
every two seconds.)
2. Push the "SELECT" button to con-
firm the selected indicator light ac-
tivity. The control mode changes to
the shift timing indicator light acti-
vation function.
To set the shift timing indicator light ac-
tivation function
TIP
The shift timing indicator light activation
function can be set between 10000
r/min and 18000 r/min. From 10000
r/min to 13000 r/min, the indicator light
can be set in increments of 500 r/min.
From 13000 r/min to 18000 r/min, the
indicator light can be set in increments
of 200 r/min.
INSTRUMENT AND CONTROL FUNCTIONS
1. Push the "RESET" button to select
the desired engine speed for acti-
vating the indicator light.
2. Push the "SELECT" button to con-
firm the selected engine speed.
The control mode changes to the
shift timing indicator light deactiva-
tion function.
To set the shift timing indicator light de-
activation function
TIP
G
The shift timing indicator light de-
activation function can be set be-
tween 10000 r/min and 18000
r/min. From 10000 r/min to 13000
r/min, the indicator light can be set
in increments of 500 r/min. From
13000 r/min to 18000 r/min, the in-
dicator light can be set in incre-
ments of 200 r/min.
G Be sure to set the deactivation
function to a higher engine speed
than for the activation function,
otherwise the shift timing indicator
light will remain deactivated.
4-13
1. Push the "RESET" button to select
the desired engine speed for deac-
tivating the indicator light.
2. Push the "SELECT" button to con-
firm the selected engine speed.
The control mode changes to the
shift timing indicator light bright-
ness function.
To adjust the shift timing indicator light
brightness
1. Push the "RESET" button to select
the desired indicator light bright-
ness level.
2. Push the "SELECT" button to con-
firm the selected indicator light
brightness level. The right display
will return to the odometer or trip-
meter mode.
4