Yamaha 2008 YZF-R1X Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Motocycles
  5. 2008 YZF-R1X
  6. Owner's manual

Yamaha 2008 YZF-R1X Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

OWNER'S MANUAL
YZF-R1X
4C8-28199-21

Advertisement

Table of Contents
loading

Related Manuals for Yamaha 2008 YZF-R1X

Summary of Contents for Yamaha 2008 YZF-R1X

  • Page 1 OWNER’S MANUAL YZF-R1X 4C8-28199-21...
  • Page 3 Welcome to the Yamaha world of motorcycling! As the owner of the YZF-R1X, you are benefiting from Yamaha’s vast experience and newest technology regarding the de- sign and manufacture of high-quality products, which have earned Yamaha a reputation for dependability.
  • Page 4 This manual should be considered a permanent part of this motorcycle and should remain with it even if the motorcycle is subsequently sold. Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most current product information available at the time of printing, there may be minor discrepancies between your motorcycle and this manual.
  • Page 5 IMPORTANT MANUAL INFORMATION EAU10200 YZF-R1X OWNER’S MANUAL ©2007 by Yamaha Motor Co., Ltd. 1st edition, July 2007 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Co., Ltd. is expressly prohibited. Printed in Japan.

  • Page 6: Table Of Contents

    TABLE OF CONTENTS SAFETY INFORMATION ....1-1 PRE-OPERATION CHECKS ..... 4-1 Adjusting the clutch lever free Location of important labels ....1-5 Pre-operation check list ....4-2 play ........... 6-22 Adjusting the rear brake light DESCRIPTION ........2-1 OPERATION AND IMPORTANT switch ........6-23 Left view ..........2-1 RIDING POINTS.........
  • Page 7 TABLE OF CONTENTS Replacing a turn signal light bulb ...........6-38 Replacing the license plate light bulb ...........6-38 Replacing an auxiliary light bulb ...6-39 Supporting the motorcycle ....6-40 Front wheel ........6-41 Rear wheel ........6-43 Troubleshooting ......6-44 Troubleshooting charts ....6-45 MOTORCYCLE CARE AND STORAGE ..........7-1 Matte color caution ......7-1 Care ..........7-1...

  • Page 8: Safety Information

    SAFETY INFORMATION EAU10281 AND/OR WHEN MADE NECES- • Ride where other motorists can SARY BY MECHANICAL CONDI- see you. Avoid riding in another MOTORCYCLES SINGLE TIONS. motorist’s blind spot. TRACK VEHICLES. THEIR SAFE USE Many accidents involve inexperi- AND OPERATION ARE DEPENDENT Safe riding enced operators.
  • Page 9 Modifications made to this motorcycle other motorists can see you. the single most critical factor in the pre- not approved by Yamaha, or the re- The posture of the operator and vention or reduction of head injuries. moval of original equipment, may ren- passenger is important for proper Always wear an approved helmet.
  • Page 10 Maximum load: been specifically designed for use on create instability due to improper 195 kg (430 lb) this motorcycle. Since Yamaha cannot weight distribution or aerody- test all other accessories that may be namic changes. If accessories When loading within this weight limit,...
  • Page 11 SAFETY INFORMATION tor and may limit control ability, Always turn the engine off before or clothing, immediately wash the therefore, such accessories are leaving the motorcycle unattended affected area with soap and water not recommended. and remove the key from the main and change your clothes.

  • Page 12: Location Of Important Labels

    SAFETY INFORMATION EAU10381 Location of important labels Please read the following important labels carefully before operating this vehicle.
  • Page 13 SAFETY INFORMATION...

  • Page 14: Description

    DESCRIPTION EAU10410 Left view 1. Fuse box (page 6-33) 8. Shock absorber assembly rebound damping force adjusting screw (page 3-22) 2. Front fork rebound damping force adjusting screw (page 3-20) 9. Shock absorber assembly spring preload adjusting ring (page 3-22) 3.

  • Page 15: Right View

    DESCRIPTION EAU10420 Right view 1. Luggage strap holder (page 3-24) 9. Engine oil level check window (page 6-11) 2. Helmet holder (page 3-19) 10.Engine oil filler cap (page 6-11) 3. Owner’s tool kit (page 6-1) 11.Rear brake light switch (page 6-23) 4.

  • Page 16: Controls And Instruments

    DESCRIPTION EAU10430 Controls and instruments 1. Clutch lever (page 3-15) 2. Left handlebar switches (page 3-13) 3. Main switch/steering lock (page 3-2) 4. Multi-function meter unit (page 3-7) 5. Front brake fluid reservoir (page 6-24) 6. Right handlebar switches (page 3-13) 7.

  • Page 17: Instrument And Control Functions

    Do not expose any key to exces- a Yamaha dealer to have them re-reg- sively high temperatures. istered. Do not use the key with the red Do not place any key close to bow for driving.

  • Page 18: Main Switch/Steering Lock

    INSTRUMENT AND CONTROL FUNCTIONS Keep other immobilizer system EAU10471 EAU10550 Main switch/steering lock keys away from the main switch All electrical circuits are supplied with as they may cause signal inter- power, the meter lighting, taillight, li- ference. cense plate light and auxiliary lights come on, and the engine can be start- ed.
  • Page 19 INSTRUMENT AND CONTROL FUNCTIONS To lock the steering To unlock the steering EAU10941 (Parking) The steering is locked, and the taillight, license plate light and auxiliary lights are on. The hazard lights and turn sig- nal lights can be turned on, but all other electrical systems are off.

  • Page 20: Indicator And Warning Lights

    “ ” warning light may flicker when have a Yamaha dealer check the elec- The corresponding indicator light flash- riding on a slope or during sudden trical circuit. es when the turn signal switch is acceleration or deceleration, but pushed to the left or right.
  • Page 21 The electrical circuit of the warning light can be checked by turning the key to “ON”. If the warning light does not come on for a few seconds, then go off, have a Yamaha dealer check the electrical cir- cuit.
  • Page 22 INSTRUMENT AND CONTROL FUNCTIONS Coolant Display Conditions What to do temperature Under 39 °C Message “Lo” is displayed. OK. Go ahead with riding. (Under 103 °F) 40–116 °C Temperature is displayed. OK. Go ahead with riding. (104–242 °F) Stop the vehicle and allow it to idle until 117–139 °C Temperature display flashes.

  • Page 23: Multi-Function Meter Unit

    When this occurs, EAU38620 have a Yamaha dealer check the self- Immobilizer system indicator light diagnosis system. (See page 3-10 for The electrical circuit of the indicator...
  • Page 24 INSTRUMENT AND CONTROL FUNCTIONS a speedometer (which shows the Tachometer Clock mode riding speed) a tachometer (which shows engine speed) an odometer (which shows the to- tal distance traveled) two tripmeters (which show the distance traveled since they were last set to zero) a fuel reserve tripmeter (which shows the distance traveled since 1.
  • Page 25 INSTRUMENT AND CONTROL FUNCTIONS Odometer, tripmeter, and stopwatch between the various tripmeter, odome- 3. Push the “SELECT” button again modes ter, and stopwatch modes in the follow- to reset the stopwatch. ing order: F-TRIP → Stopwatch → TRIP A → Split-time measurement TRIP B →...
  • Page 26 INSTRUMENT AND CONTROL FUNCTIONS Coolant temperature display Air intake temperature display When the air intake temperature display is selected, “A” is displayed before the temperature. Self-diagnosis device 1. Coolant temperature display 1. Air intake temperature display The coolant temperature display indi- The air intake temperature display indi- cates the temperature of the coolant.
  • Page 27 If the right display indicates any error ror code. codes, note the code number, and then have a Yamaha dealer check the vehi- NOTE: cle. If the right display indicates error code ECA11590...
  • Page 28 INSTRUMENT AND CONTROL FUNCTIONS Shift timing indicator light activity: To adjust the brightness of the multi- The indicator light will flash This function allows you to choose function meter displays and tachometer when activated. (This setting whether or not the indicator light 1.

  • Page 29: Handlebar Switches

    INSTRUMENT AND CONTROL FUNCTIONS 1. Push the “RESET” button to select 1. Push the “RESET” button to select EAU12347 Handlebar switches the desired engine speed for acti- the desired engine speed for deac- vating the indicator light. tivating the indicator light. Left 2.
  • Page 30 INSTRUMENT AND CONTROL FUNCTIONS Right position. To cancel the turn signal EAU12733 Hazard switch “ ” lights, push the switch in after it has re- With the key in the “ON” or “ ” posi- turned to the center position. tion, use this switch to turn on the haz- ard lights (simultaneous flashing of all EAU12500...

  • Page 31: Clutch Lever

    INSTRUMENT AND CONTROL FUNCTIONS EAU12820 EAU12870 EAU33850 Clutch lever Shift pedal Brake lever 1. Clutch lever 1. Shift pedal 1. Brake lever 2. Brake lever position adjusting knob The clutch lever is located at the left The shift pedal is located on the left 3.

  • Page 32: Brake Pedal

    INSTRUMENT AND CONTROL FUNCTIONS it by aligning a groove on the adjusting EAU12941 EAU13072 Brake pedal Fuel tank cap knob with the “ ” mark on the brake lever. 1. Brake pedal 1. Fuel tank cap lock cover 2. Unlock. The brake pedal is on the right side of the motorcycle.

  • Page 33: Fuel

    Avoid spilling fuel on the hot en- as well as to the exhaust system. gine. Your Yamaha engine has been de- signed to use premium unleaded gaso- line with a research octane number of 95 or higher. If knocking (or pinging) oc-...

  • Page 34: Catalytic Converters

    INSTRUMENT AND CONTROL FUNCTIONS curs, use a gasoline of a different EAU13442 EAU33861 Catalytic converters Seats brand. Use of unleaded fuel will extend This vehicle is equipped with catalytic spark plug life and reduce maintenance converters in the exhaust system. Rider seat costs.

  • Page 35: Helmet Holders

    INSTRUMENT AND CONTROL FUNCTIONS 2. Lift the front of the passenger seat EAU33870 Helmet holders and pull it forward. To install the passenger seat 1. Insert the projection on the rear of the passenger seat into the seat holder as shown, and then push the front of the seat down to lock it in place.

  • Page 36: Adjusting The Front Fork

    INSTRUMENT AND CONTROL FUNCTIONS To release a helmet from a helmet EAU14741 load thereby soften Adjusting the front fork holder suspension, turn the adjusting bolt on This front fork is equipped with spring Remove the passenger seat, remove each fork leg in direction (b). preload adjusting bolts, rebound damp- the helmet from the helmet holder, and NOTE:...
  • Page 37 INSTRUMENT AND CONTROL FUNCTIONS Rebound damping force Compression damping force ECA10100 CAUTION: Never attempt to turn an adjusting mechanism beyond the maximum or minimum settings. NOTE: Although the total number of clicks of a damping force adjusting mechanism may not exactly match the above spec- ifications due to small differences in 1.

  • Page 38: Adjusting The Shock Absorber Assembly

    INSTRUMENT AND CONTROL FUNCTIONS EAU42940 Spring preload Spring preload setting: Adjusting the shock absorber Minimum (soft): assembly This shock absorber assembly is Standard: equipped with a spring preload adjust- Maximum (hard): ing ring, a rebound damping force ad- justing screw, a compression damping force adjusting bolt (for fast compres- Rebound damping force sion damping) and a compression...
  • Page 39 INSTRUMENT AND CONTROL FUNCTIONS direction (a). To decrease the compres- Rebound damping setting: Compression damping setting (for sion damping force and thereby soften Minimum (soft): slow compression damping): the compression damping, turn the ad- 20 click(s) in direction (b)* Minimum (soft): Standard: 20 click(s) in direction (b)* justing bolt in direction (b).

  • Page 40: Luggage Strap Holders

    EAU15181 EAU15281 Luggage strap holders EXUP system handling the shock absorber. The This model is equipped with Yamaha’s manufacturer cannot be held re- EXUP (EXhaust Ultimate Power valve) sponsible for property damage or system. This system boosts engine personal injury that may result from power by means of a valve that regu- improper handling.

  • Page 41: Sidestand

    INSTRUMENT AND CONTROL FUNCTIONS EAU15301 below and have a Yamaha dealer re- EAU15312 Sidestand Ignition circuit cut-off system pair it if it does not function proper- The sidestand is located on the left side The ignition circuit cut-off system (com- of the frame.
  • Page 42 5. Push the start switch. Does the engine start? The neutral switch may be defective. The motorcycle should not be ridden until checked by a Yamaha dealer. With the engine still running: 6. Move the sidestand up. 7. Keep the clutch lever pulled.

  • Page 43: Pre-Operation Checks

    PRE-OPERATION CHECKS EAU15593 The condition of a vehicle is the owner’s responsibility. Vital components can start to deteriorate quickly and unexpectedly, even if the vehicle remains unused (for example, as a result of exposure to the elements). Any damage, fluid leakage or loss of tire air pressure could have serious consequences.

  • Page 44: Pre-Operation Check List

    • If necessary, add recommended coolant to specified level. 6-14 • Check cooling system for leakage. • Check operation. • If soft or spongy, have Yamaha dealer bleed hydraulic system. • Check brake pads for wear. Front brake • Replace if necessary.
  • Page 45 • Make sure that operation is smooth. • Check cable free play. Throttle grip 6-19, 6-28 • If necessary, have Yamaha dealer adjust cable free play and lubricate cable and grip housing. • Make sure that operation is smooth. Control cables 6-27 •...

  • Page 46: Operation And Important Riding Points

    3-25. should be on, otherwise have a short time. Always make sure Never ride with the sidestand Yamaha dealer check the electrical cir- that there is adequate ventila- down. cuit. tion. 1. Turn the key to “ON” and make 3.

  • Page 47: Shifting

    OPERATION AND IMPORTANT RIDING POINTS serve the battery. Do not crank the en- EAU16671 ECA10260 Shifting CAUTION: gine more than 10 seconds on any one attempt. Even with the transmission in the neutral position, do not ECA11130 coast for long periods of time CAUTION: with the engine off, and do not For maximum engine life, always...

  • Page 48: Tips For Reducing Fuel Consumption

    If any engine trouble should oc- result in engine overheating must be lights or at railroad crossings). cur during the engine break-in avoided. period, immediately have a Yamaha dealer check the vehi- EAU17081 cle. 0–1000 km (0–600 mi) Avoid prolonged operation above 6900 NOTE: r/min.

  • Page 49: Parking

    OPERATION AND IMPORTANT RIDING POINTS EAU17212 Parking When parking, stop the engine, and then remove the key from the main switch. EWA10310 WARNING Since the engine and exhaust system can become very hot, park in a place where pedestri- ans or children are not likely to touch them.

  • Page 50: Owner's Tool Kit

    Yamaha dealer do it for you. NOTE: If you do not have the tools or experi- 1. Muffler bracket cover ence required for a particular job, have 2. Muffler bracket a Yamaha dealer perform it for you.

  • Page 51: Periodic Maintenance And Lubrication Chart

    From 50000 km (30000 mi), repeat the maintenance intervals starting from 10000 km (6000 mi). Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills.
  • Page 52 PERIODIC MAINTENANCE AND MINOR REPAIR ODOMETER READING ANNUAL ITEM CHECK OR MAINTENANCE JOB 1000 km 10000 km 20000 km 30000 km 40000 km CHECK (600 mi) (6000 mi) (12000 mi) (18000 mi) (24000 mi) √ √ √ √ √ • Check for cracks or damage. 8 * Brake hoses •...
  • Page 53 PERIODIC MAINTENANCE AND MINOR REPAIR ODOMETER READING ANNUAL ITEM CHECK OR MAINTENANCE JOB 1000 km 10000 km 20000 km 30000 km 40000 km CHECK (600 mi) (6000 mi) (12000 mi) (18000 mi) (24000 mi) Brake lever pivot √ √ √ √...
  • Page 54 PERIODIC MAINTENANCE AND MINOR REPAIR ODOMETER READING ANNUAL ITEM CHECK OR MAINTENANCE JOB 1000 km 10000 km 20000 km 30000 km 40000 km CHECK (600 mi) (6000 mi) (12000 mi) (18000 mi) (24000 mi) Front and rear brake √ √ √...
  • Page 55 PERIODIC MAINTENANCE AND MINOR REPAIR Hydraulic brake service • Regularly check and, if necessary, correct the brake fluid level. • Every two years replace the internal components of the brake master cylinders and calipers, and change the brake fluid. • Replace the brake hoses every four years and if cracked or damaged.

  • Page 56: Removing And Installing Cowlings And Panels

    PERIODIC MAINTENANCE AND MINOR REPAIR EAU18712 Removing and installing cowl- ings and panels The cowlings and panels shown need to be removed to perform some of the maintenance jobs described in this chapter. Refer to this section each time a cowling or panel needs to be re- moved and installed.
  • Page 57 PERIODIC MAINTENANCE AND MINOR REPAIR 2. Fit the projections on the cowling into the slots and slide it forward. 1. Cowling B 1. Bolt 2. Quick fastener 2. Quick fastener screw 3. Cowling C 1. Slot 2. Disconnect the turn signal light 2.
  • Page 58 PERIODIC MAINTENANCE AND MINOR REPAIR To install the cowling EAU36630 Panels C and D 1. Insert the projections into the slots, and then slide the cowling forward. To remove one of the panels Remove the screw and the quick fas- tener, and then pull the panel off as shown.

  • Page 59: Checking The Spark Plugs

    Do not attempt to diagnose wipe off any grime from the spark plug such problems yourself. Instead, have threads. a Yamaha dealer check the vehicle. If a spark plug shows signs of electrode Tightening torque: Spark plug: erosion and excessive carbon or other 12.5 Nm (1.25 m·kgf, 9.0 ft·lbf)

  • Page 60: Engine Oil And Oil Filter Cartridge

    PERIODIC MAINTENANCE AND MINOR REPAIR EAU19912 NOTE: Engine oil and oil filter car- NOTE: If a torque wrench is not available when The engine oil should be between the tridge installing a spark plug, a good estimate minimum and maximum level marks. The engine oil level should be checked of the correct torque is 1/4–1/2 turn before each ride.
  • Page 61 Make sure that the O-ring is properly An oil filter wrench is available at a seated. Yamaha dealer. 7. Install the new oil filter cartridge 6. Apply a thin coat of engine oil to with an oil filter wrench, and then...
  • Page 62 17 Nm (1.7 m·kgf, 12 ft·lbf) ECA11620 or remains on, immediately turn the CAUTION: engine off and have a Yamaha dealer 8. Install the engine oil drain bolt, and In order to prevent clutch slip- check the vehicle. then tighten it to the specified page (since the engine oil also 11.

  • Page 63: Coolant

    PERIODIC MAINTENANCE AND MINOR REPAIR EAU20070 Coolant The coolant level should be checked before each ride. In addition, the cool- ant must be changed at the intervals specified in the periodic maintenance and lubrication chart. EAU42990 To check the coolant level 1.
  • Page 64 PERIODIC MAINTENANCE AND MINOR REPAIR If water has been added to the 3. Place a container under the engine coolant, have a Yamaha dealer to collect the used coolant. check the antifreeze content of 4. Remove the radiator cap. the coolant as soon as possible,...
  • Page 65 Tightening torque: the vehicle for coolant leakage. If Coolant drain bolt: If coolant is not available, use coolant is leaking, have a Yamaha 7 Nm (0.7 m·kgf, 5.1 ft·lbf) distilled water or soft tap water dealer check the cooling system.

  • Page 66: Replacing The Air Filter Element

    PERIODIC MAINTENANCE AND MINOR REPAIR EAU42960 Replacing the air filter element The air filter element should be re- placed at the intervals specified in the periodic maintenance and lubrication chart. Replace the air filter element more frequently if you are riding in un- usually wet or dusty areas.
  • Page 67 Before installing the fuel tank, make sure that the fuel hoses are not damaged. If any fuel hose is damaged, do not start the engine. Have a Yamaha dealer replace the hose, other- wise fuel may leak. Make sure that the fuel hoses 1.

  • Page 68: Checking The Engine Idling Speed

    To prevent this checked as follows and, if necessary, from occurring, the valve clearance adjusted by a Yamaha dealer at the in- must be adjusted by a Yamaha dealer tervals specified in the periodic mainte- at the intervals specified in the periodic nance and lubrication chart.

  • Page 69: Tires

    PERIODIC MAINTENANCE AND MINOR REPAIR EAU21780 evenly from side to side. Properly Tire air pressure (measured on cold Tires adjust the suspension for your load, tires): To maximize the performance, durabil- and check the condition and pres- 0–90 kg (0–198 lb): ity, and safe operation of your motor- Front: sure of your tires.
  • Page 70 Yamaha Motor Co., Ltd. with the local regulations. in it, or if the sidewall is cracked, con- Always make sure that the valve tact a Yamaha dealer immediately and caps are securely installed to have the tire replaced. prevent air pressure leakage.

  • Page 71: Cast Wheels

    Other tires may run fore each ride. If any damage is the danger of bursting at super found, have a Yamaha dealer re- high speeds. place the wheel. Do not attempt Brand-new tires can have a rela-...

  • Page 72: Adjusting The Rear Brake Light Switch

    PERIODIC MAINTENANCE AND MINOR REPAIR EAU22270 EAU22390 NOTE: Adjusting the rear brake light Checking the front and rear If the specified clutch lever free play switch brake pads cannot be obtained as described The front and rear brake pads must be above, proceed as follows.

  • Page 73: Checking The Brake Fluid Level

    EAU22580 Before riding, check that the brake fluid Checking the brake fluid level have a Yamaha dealer replace the is above the minimum level mark and brake pads as a set. replenish if necessary. A low brake fluid...

  • Page 74: Changing The Brake Fluid

    EAU22760 Changing the brake fluid Drive chain slack ter the brake fluid reservoir when Have a Yamaha dealer change the The drive chain slack should be refilling. Water will significantly brake fluid at the intervals specified in checked before each ride and adjusted...
  • Page 75 PERIODIC MAINTENANCE AND MINOR REPAIR 3. Tighten the locknuts, then the axle NOTE: nut to their specified torques. Using the alignment marks on each side of the swingarm, make sure that Tightening torques: both chain pullers are in the same posi- Locknut: tion for proper wheel alignment.

  • Page 76: Cleaning And Lubricating The Drive Chain

    If a cable is damaged wet areas. Service the drive chain as or does not move smoothly, have a follows. Yamaha dealer check or replace it. ECA10581 CAUTION: Recommended lubricant: Engine oil...

  • Page 77: Checking And Lubricating The Throttle Grip And Cable

    PERIODIC MAINTENANCE AND MINOR REPAIR EAU23111 EAU23142 Recommended lubricants: Checking and lubricating the Checking and lubricating the Brake lever: throttle grip and cable brake and clutch levers Silicone grease The operation of the throttle grip should Clutch lever: Brake lever Lithium-soap-based grease be checked before each ride.

  • Page 78: Checking And Lubricating The Shift Pedal

    Recommended lubricant: EWA10730 Lithium-soap-based grease WARNING If the sidestand does not move up and down smoothly, have a Yamaha dealer check or repair it. Recommended lubricant: Lithium-soap-based grease 6-29...

  • Page 79: Checking The Front Fork

    Securely support the vehicle so that fork does not operate smoothly, damage and excessive oil leakage. there is no danger of it falling over. have a Yamaha dealer check or re- pair it. To check the operation 2. Hold the lower ends of the front 1.

  • Page 80: Checking The Wheel Bearings

    To charge the battery Have a Yamaha dealer charge the bat- tery as soon as possible if it seems to have discharged. Keep in mind that the battery tends to discharge more quickly if the vehicle is equipped with optional electrical accessories.
  • Page 81 IES OUT OF THE REACH OF If you do not have access to a Electrolyte is poisonous and CHILDREN. sealed-type (MF) battery charg- have a Yamaha dealer dangerous since it contains sul- charge your battery. furic acid, which causes severe To store the battery burns.

  • Page 82: Replacing The Fuses

    PERIODIC MAINTENANCE AND MINOR REPAIR EAU42921 Replacing the fuses To access the main fuse The main fuse is located under the rider seat and can be accessed as follows: 1. Remove the rider seat. (See page 3-18.) 2. Move the ECU (Electronic Control Unit) away from the fuse.
  • Page 83 PERIODIC MAINTENANCE AND MINOR REPAIR Specified fuses: Main fuse: 50.0 A Headlight fuse: 25.0 A Signaling system fuse: 7.5 A Ignition fuse: 15.0 A Radiator fan fuse: 15.0 A × 2 1. Fuse box 1. Turn signal light fuse Turn signal light fuse: 2.

  • Page 84: Replacing A Headlight Bulb

    PERIODIC MAINTENANCE AND MINOR REPAIR 4. If the fuse immediately blows EAU42930 Replacing a headlight bulb again, have a Yamaha dealer check the electrical system. 1. Headlight bulb cover 2. Headlight coupler 1. High beam headlight bulb 3. Unhook the headlight bulb holder, 2.
  • Page 85 6. Install the panel. of the bulb, and the bulb life will 7. Have a Yamaha dealer adjust the be adversely affected. Thor- headlight beam if necessary. 1. Headlight coupler...
  • Page 86 7. Have a Yamaha dealer adjust the ency of the glass, the luminosity headlight beam if necessary. of the bulb, and the bulb life will be adversely affected.

  • Page 87: Tail/Brake Light

    1. Remove the license plate light unit If the tail/brake light does not come on, by removing the screw. by removing the screws. have a Yamaha dealer check it. 1. Screw 1. License plate light unit 2. Screw 2. Remove the defective bulb by 2.

  • Page 88: Replacing An Auxiliary Light Bulb

    PERIODIC MAINTENANCE AND MINOR REPAIR 3. Remove the defective bulb by pull- EAU33910 3. Remove the socket (together with Replacing an auxiliary light ing it out. the bulb) by pulling it out. bulb 4. Insert a new bulb into the socket. This model is equipped with two auxil- 5.

  • Page 89: Supporting The Motorcycle

    PERIODIC MAINTENANCE AND MINOR REPAIR 7. Install the auxiliary light bulb cover EAU24350 a jack either under each side of the Supporting the motorcycle by installing the quick fastener. frame in front of the rear wheel or under Since this model is not equipped with a each side of the swingarm.

  • Page 90: Front Wheel

    4. Remove the brake caliper on each To remove the front wheel side by removing the bolts. EWA10820 WARNING It is advisable to have a Yamaha dealer service the wheel. Securely support the motor- cycle so that there is no danger 1. Wheel axle of it falling over.
  • Page 91 PERIODIC MAINTENANCE AND MINOR REPAIR Tightening torque: NOTE: Wheel axle pinch bolt: Make sure that there is enough space 21 Nm (2.1 m·kgf, 15 ft·lbf) between the brake pads before install- ing the brake calipers onto the brake 12. While applying the front brake, discs.

  • Page 92: Rear Wheel

    4. Loosen the locknut on each side of EWA10820 WARNING the swingarm. 5. Turn the drive chain slack adjust- It is advisable to have a Yamaha ing bolts fully in direction (a) and dealer service the wheel. push the wheel forward. Securely support the motor- 6.

  • Page 93: Troubleshooting

    The following troubleshooting charts represent quick and easy procedures for checking these vital systems your- self. However, should your motorcycle require any repair, take it to a Yamaha 1. Retainer dealer, whose skilled technicians have 2. Slot the necessary tools, experience, and 2.

  • Page 94: Troubleshooting Charts

    Remove the spark plugs and check the electrodes. The engine does not start. Have a Yamaha dealer check the vehicle. Check the battery. 4. Battery The engine turns over The battery is good.
  • Page 95 Start the engine. If the engine overheats again, have a The coolant level Yamaha dealer check and repair the cooling system. is OK. NOTE: If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended coolant as soon as possible.

  • Page 96: Motorcycle Care And Storage

    Rust and corrosion can develop matte colored finished parts. Be Cleaning even if high-quality components are sure to consult a Yamaha dealer for ECA15091 advice on what products to use be- used. A rusty exhaust pipe may go un- CAUTION: fore cleaning the vehicle.
  • Page 97 MOTORCYCLE CARE AND STORAGE with mild detergent, alkaline pounds for plastic may leave NOTE: products and a soft brush may scratches on the windshield. Salt sprayed on roads in the winter may be used. Test the product on a small hid- remain well into spring.
  • Page 98 Note that the thermally induced discoloring of the portion of the ex- Make sure that there is no oil or Consult a Yamaha dealer for advice on haust pipe leading into the titanium what products to use. wax on the brakes or tires.

  • Page 99: Storage

    MOTORCYCLE CARE AND STORAGE EAU26201 3. Perform the following steps to pro- 4. Lubricate all control cables and the Storage tect the cylinders, piston rings, etc. pivoting points of all levers and from corrosion. pedals as well as of the side- Short-term a.

  • Page 100: Specifications

    SPECIFICATIONS Dimensions: Engine oil: Fuel: Overall length: Type: Recommended fuel: 2060 mm (81.1 in) SAE10W-30, SAE10W-40, SAE10W-50, Premium unleaded gasoline only Overall width: SAE15W-40, SAE20W-40 or SAE20W-50 Fuel tank capacity: 720 mm (28.3 in) 18.0 L (4.76 US gal) (3.96 Imp.gal) Overall height: Fuel reserve amount: -20 -10...
  • Page 101 SPECIFICATIONS Gear ratio: Loading: Front brake: 1st: Maximum load: Type: 38/15 (2.533) 195 kg (430 lb) Dual disc brake 2nd: (Total weight of rider, passenger, cargo and Operation: 33/16 (2.063) accessories) Right hand operation 3rd: Tire air pressure (measured on cold Recommended fluid: 37/21 (1.762) DOT 4...
  • Page 102 SPECIFICATIONS Battery: Coolant temperature warning light: Model: Engine trouble warning light: YTZ10S Voltage, capacity: Immobilizer system indicator light: 12 V, 8.6 Ah Headlight: Shift timing indicator light: Bulb type: Halogen bulb Bulb voltage, wattage × quantity: Fuses: Main fuse: Headlight: 12 V, 55.0 W ×...

  • Page 103: Consumer Information

    Record the key identification number, vehicle identification number and mod- el label information in the spaces pro- vided below for assistance when ordering spare parts from a Yamaha dealer or for reference in case the vehi- cle is stolen. KEY IDENTIFICATION NUMBER: 1.

  • Page 104: Motorcycle Noise Regulation (For Australia)

    This informa- b. The use of the vehicle after such tion will be needed when ordering device or element of design has spare parts from a Yamaha dealer. been removed or rendered inoper- EWA12371 ative by any person.
  • Page 105 INDEX Front fork, adjusting ......3-20 Front fork, checking.......6-30 Air filter element, replacing ....6-17 Oil level warning light ......3-4 Fuel ............3-17 Auxiliary light bulb, replacing ....6-39 Fuel consumption, tips for reducing ..5-3 Parking............ 5-4 Fuel level warning light......3-4 Battery ..........
  • Page 106 INDEX Tires ............6-20 Tool kit ............ 6-1 Troubleshooting ........6-44 Troubleshooting charts ......6-45 Turn signal indicator lights ...... 3-4 Turn signal light bulb, replacing .... 6-38 Turn signal switch ......... 3-14 Valve clearance ........6-19 Vehicle identification number ....9-1 Wheel bearings, checking.....
  • Page 108 YAMAHA MOTOR CO., LTD. PRINTED ON RECYCLED PAPER PRINTED IN JAPAN 2007.07-0.3×1 CR...

Table of Contents