Multi-Function Meter Unit - Yamaha 2010 YZF-R6Z Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Multi-function meter unit

1 2 3
8
7
4
1. Speedometer
2. Clock
3. Tachometer
4. Coolant temperature display/air intake tem-
perature display
5. Odometer/tripmeters/fuel reserve tripme-
ter/stopwatch
6. Shift timing indicator light
7. "RESET" button
8. "SELECT" button
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit. Changing
settings while riding can distract the
operator and increase the risk of an
accident.
EAU39445 The multi-function
equipped with the following:
G a speedometer
4
G a tachometer
G an odometer
G
two tripmeters (which show the
distance traveled since they were
5
last set to zero)
G
a fuel reserve tripmeter (which
shows the distance traveled since
6 the fuel level warning light came
on)
G
a stopwatch
G
a clock
G
a coolant temperature display
G an air intake temperature display
G a self-diagnosis device
G
a display brightness and shift tim-
ing indicator light control mode
TIP
EWA12422
Be sure to turn the key to "ON" before
using the "SELECT" and "RESET" but-
tons, except for setting the display
brightness and shift timing indicator
light control mode.
meter unit is Tachometer
1. Tachometer
2. Tachometer red zone
The electric tachometer allows the rider
to monitor the engine speed and keep it
within the ideal power range.
When the key is turned to "ON", the ta-
chometer needle will sweep once
across the r/min range and then return
to zero r/min in order to test the electri-
cal circuit.
NOTICE
Do not operate the engine in the ta-
chometer red zone.
Red zone: 16500 r/min and above
4-8
1
2
ECA10031