5-10 Serial Ata Ports - Supermicro 6048R-DE2CR24L User Manual

System Heartbeat/Power LED
A System Heartbeat/Power LED (LEDL)
is located below the BMC Heartbeat
LED on I/O back panel. When LEDL
is blinking, your system and its power
supply are working properly. See the
table on the right for more information.
SAS HDD LED
The LED indicator for the SAS HDD
is located at HDD LED2 on the
motherboard. When this LED is blinking,
the SAS HDD supported by the LSI SAS
controller is active. See the table at right
for more information.
SAS Overheat LED
A SAS Overheat LED is located at
LEDSOV1 on the motherboard. When
this LED is on, SAS overheating has
occurred.

5-10 Serial ATA Ports

Serial ATA Ports
An onboard SATA port is located next to the USB3 port on the serverboard to
provide serial-link signal transmission.
Note: For more information on SATA HostRAID confi guration, please refer to the
Intel SATA HostRAID User's Guide posted on our website at www.supermicro.com.
Chapter 5: Advanced Serverboard Setup
System Heartbeat/Power
State
Green: Blinking
SAS HDD Activity LED
Color/State
Green: Blinking
SAS Overheat LED
Color/State Defi nition
Red: On
5-17
LED Status
Defi nition
System/PWR: Normal
LED Status
Defi nition
SAS HDD: Active
LED Status
SAS Overheating