Table of Contents
Advertisement
SUPERSTORESYSTEM 6048R-DE2CR24L User's Manual
Installing the Chassis into a Rack
Installing into a Rack
1. Confi rm that the inner and outer rails are properly installed.
2. Line up the inner (chassis) rails with the front of the outer (rack) rails.
3. Slide the chassis rails into the rack rails, keeping the pressure even on both
sides (you may have to depress the locking tabs when inserting). When the
server has been pushed completely into the rack, you should hear the locking
tabs "click" into position.
4. (Optional) Insert and tighten the thumbscrews that hold the front of the server
to the rack.
Note: Figure is for illustrative purposes only. Always install servers to the bottom
of a rack fi rst.
Figure 2-3. Installing the Chassis into the Rack
2-6
Advertisement
Table of Contents
