Table of Contents
Advertisement
SUPERSTORESYSTEM 6048R-DE2CR24L User's Manual
1-2
Serverboard Features
The 6048R-DE2CR24L SuperStoreSystem is built around two X10DRS
serverboards for a dual-node system that shares storage resources as well as
features a dedicated PCI-E bus between server nodes for High Availability (HA),
Cluster in a Box (CiB) applications The X10DRS is a dual processor serverboard
based on the Intel® PCH C612 chipset. Below are the main features of the X10DRS.
(See Figure 1-1 for a block diagram of the chipset).
Processors
The X10DRS supports single or dual Intel® Xeon E5-2600 v3/v4 series processors
in LGA 2011 R3 type sockets. Two X10DRS boards are included in the storage
system. Please refer to the serverboard description pages on our website for a
complete listing of supported processors (www.supermicro.com).
Memory
E a c h X 1 0 D R S h a s e i g h t D I M M s l o t s t h a t c a n s u p p o r t u p t o
1 TB of LRDIMM (Load Reduced) or 256 GB of Registered (RDIMM)
DDR4 (288-pin) ECC 2400/2133/1866/1600 MHz memory. See Chapter 5 for
details.
SAS Disk Controller
An IR mode SAS controller is located on a mezzanine card included in each of the
server nodes. Each controller supports twenty-four (24) disks in the front as well
as two external SAS 3.0 ports (x8 connectivity).
SAS Expander
One 40-port SAS expander is integrated into each X10DRS board.
SATA
Each X10DRS has two SATA 3.0 ports with power headers to support two SATA
Disk-on-Module (SATA DOM) devices per node. RAID 0 and 1 are supported by
the PCH.
NTB Connectivity
Non Transparent Bridge connectivity featuring 8 lanes of PCI-E 3.0 between server
nodes.
1-2
Advertisement
Table of Contents
