Table of Contents
Advertisement
SUPERSTORESYSTEM 6048R-DE2CR24L User's Manual
5-7
Connector and Port Defi nitions
VGA/COM1/USB 2.0 Connector (JKVM1)
A VGA/COM1/USB 2.0 connector is located next to LAN2 on the I/O back panel.
JKVM1 provides a video port as well as serial and USB (2.0) connections with
SMCI-proprietary cable (CBL-0218L) connected to JKVM1.
10GbE LAN (TLAN) Ports & IPMI LAN Port
Two 10-Gigabit Ethernet LAN ports (LAN1/2) are located on the I/O back panel.
LAN port 1 can also be used as IPMI LAN for Serial-Over-LAN (SOL) support. All
these ports accept RJ45-type cables. Please refer to the LED Indicator section for
LAN LED information.
External SAS Port
An external SAS 3.0 port is supported by the AOM-S3008-L8-SB add-on module,
which is located next to the JKVM1 connector on the I/O back panel.
Universal Serial Bus (USB)
In addition to the two USB 2.0 ports
(USB 1/2) on the I/O back panel, a
Type A connector is also located on
the motherboard to provide USB 3.0
support (USB 3, cables not included).
See note below.)
Back Panel USB0/1 (USB2.0)
Pin Defi nitions
Pin#
Defi nition
1
+5V
2
USB_PN1
3
USB_PP1
4
Ground
USB3 (USB3.0)
Pin Defi nitions
Pin# Description
1
2
3
4
5
6
7
8
9
5-12
Pin#
Defi nition
5
+5V
6
USB_PN0
7
USB_PP0
8
Ground
VBUS
SSRX-
SSRX+
Ground
SSTX-
SSTX+
GND_DRAIN
D-
D+
Advertisement
Table of Contents
