Table of Contents
Advertisement
SUPERSTORESYSTEM 6048R-DE2CR24L User's Manual
5-2
Cable and Device Connections
All data and power connections between the serverboard to the system (including
the power supplies and the hard drives) are provided through the midplane. Most of
these connections are made automatically when the system is assembled. "Right"
and "left" refer to the side of the chassis as viewed from the front of the system.
Also refer to Chapter 6 Section 5 for an image of the midplane with the connections
listed below.
Power Connections
Power is routed from the power supplies to the power distribution board which in
turn connects to the midplane. When the serverboards are seated in their bays they
plug into the midplane to receive power.
Fan Cabling
The 4 fans behind midplane are powered and controlled through midplane while the
2 fans in each node connected to MB. All fans in the system is managed by BMC.
Control Panels
A ribbon cable connects each control panel to the midplane. The right and left side
control panels connect to JP1 and JP2 on the midplane, respectively.
5-2
Advertisement
Table of Contents
