Mac Filter - D-Link DSL-2650U User Manual

DSL-2650U/NRU 3G/ADSL/Ethernet Router
with Wi-Fi and Built-in Switch
User Manual

MAC Filter

On the Wi-Fi / MAC-Filter page, you can define a set of MAC addresses of devices which will be
allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to
access the WLAN.
By default, MAC filtering is not active (the Disabled choice of the MAC-filter restrict mode
radio button is selected).
To open your wireless network for the devices which MAC addresses are specified on the MAC-
addresses tab and to close the wireless network for all other devices, select the Allow choice of
the MAC-filter restrict mode radio button and click the Change button.
To close your wireless network for the devices which MAC addresses are specified on the MAC-
addresses tab, select the Deny choice of the MAC-filter restrict mode radio button and click
the Change button.
To add a MAC address to which the selected filtering mode will be applied, proceed to the MAC-
addresses tab, enter this address in the MAC-address field of the MAC-address adding
section, and click the Add button. After that, the entered address will be displayed in the MAC-
address list section.
Figure 37. The MAC filter for the wireless network.
Page 52 of 107
Configuring via Web-based Interface