D-Link DSL-2650U User Manual page 59

DSL-2650U/NRU 3G/ADSL/Ethernet Router
with Wi-Fi and Built-in Switch
User Manual
The following fields are available on the page:
Parameter
Beacon Period
RTS Threshold
Frag Threshold
DTIM Period
TX Power
Bandwidth
TX Preamble
When you have configured the parameters, click the Change button.
The time interval (in milliseconds) between packets sent to
synchronize the wireless network.
The minimum size (in bites) of a packet for which an RTS frame is
transmitted.
The maximum size (in bites) of a non-fragmented packet. Larger
packets are fragmented (divided).
The time period (in seconds) between sending a DTIM (a message
notifying on broadcast or multicast transmission) and data
transmission.
The router's transmit power (in percentage terms).
Channel bandwidth for 802.11n devices.
This parameter defines the length of the CRC block sent by the
router when communicating to wireless devices.
Select a value from the drop-down list.
Long Preamble.
Short Preamble (this value is recommended for networks with
high-volume traffic).
Page 59 of 107
Configuring via Web-based Interface
Description