Creating 3G Wan Connection - D-Link DSL-2650U User Manual

DSL-2650U/NRU 3G/ADSL/Ethernet Router
with Wi-Fi and Built-in Switch
User Manual

Creating 3G WAN Connection

If the PIN code check is enabled for the SIM card inserted into your USB modem, then prior to
creating a 3G WAN connection, proceed to the USB modem menu and enter the PIN code on the
page displayed (see the USB Modem section, page 85).
Figure 23. The page for creating a new connection. The General settings and Physical layer sections.
Parameter
Name
Connection Type
Enable
Direction
Physical interface
General settings
A name for connection for easier identification.
Select the 3G value.
Select the checkbox to enable the connection.
The direction of this connection.
Physical layer
Select the usb value.
Page 31 of 107
Configuring via Web-based Interface
Description