DSL-2650U/NRU 3G/ADSL/Ethernet Router
with Wi-Fi and Built-in Switch
User Manual
System Log
On the System / System log page, you can set the system log options and configure sending the
system log to a remote host.
Figure 79. The System / System log page. The Configuration tab.
To enable logging of the system events, select the Logging checkbox on the Configuration tab.
Then specify the needed parameters.
Control
Logging type
Local logging level
Select a type of logging from the drop-down list.
Local: the system log is stored in the router's memory (and
•
displayed on the Log tab). When this value is selected, the
Server address type, Server, and Port fields are not
displayed.
Remote: the system log is sent to the remote host specified
•
in the Server field.
Local and remote: the system log is stored in the router's
•
memory (and displayed on the Log tab) and sent to the
remote host specified in the Server field.
Select a type of messages and alerts/notifications to be stored locally
in the router's memory. The field is available, when the Local or
Local and remote value is selected from the Logging type drop-
down list.
Page 100 of 107
Configuring via Web-based Interface
Description