Answer Delay - BT Studio 3500 User Manual

8474 Studio 3500 UG Iss2 [2]
34 Using the answering machine
Time saver
When you call from another phone to
access your messages remotely, if
your answering machine is set to time
saver and you have new messages it
will answer after 2 rings, if you do not
have any new messages, it will answer
after 6 rings. This means you can
hang up after 3 rings knowing you
have no new messages, saving you
time and the cost of the call. Your
handset will automatically return to
standby if no button is pressed for 15
seconds or more.
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
25/10/07 16:37
BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999
2. Scroll to OGM SETTING and press
3. Scroll to DELETE OGM and press
4. Press or
press . Your personal OGM has been deleted and the pre-
recorded OGM will be played.

Answer delay

Answer delay sets the number of times your BT Studio 3500
will ring before the answer machine picks up your call and
starts playing the outgoing message.
You can change this setting to between 2-9 rings or Time
Saver. The default setting is 6 rings. When the answer on/off
setting is set to off, the answer delay is 20 rings.
Using the base:
1. Press and hold the
of rings required.
Using the handset:
1. Press , scroll
2. Scroll to ANS DELAY and press
display the current setting.
3. Use and
press to confirm.
Page 34
.
to select either ANS AND REC or ANS ONLY and
button and release after the number
to TAM SETTINGS and press
. The handset will
to select the number of rings required and
.
.