Additional Handsets And Bases; Register A New Handset To Your Base - BT Studio 3500 User Manual

8474 Studio 3500 UG Iss2 [2]

Additional handsets and bases

Up to 5 handsets can be registered and operated from the BT
Studio 3500 base.
Each handset can be registered with up to four bases.
If you buy new handsets to use with your BT Studio 3500
they will have to be registered to the base before you can
use them.
Register a new BT Studio 3500 handset to your BT Studio
3500 base
1. At the base: Press and hold
you hear two beeps. You now have 90 seconds to register the
handset.
2. At the handset: Press
press .
3. Scroll to REG BASE and press
4. Enter the base number (1–4). The numbers flashing are
already in use.
5. The display will show SEARCHING...1 When the handset finds
the base signal, the SEARCHING and base identification
number is displayed.
6. The display will ask for the PIN to be entered. Enter the PIN
(the default setting: 0000) and press
hear a beep. The handset is now registered.
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
25/10/07 16:37
BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999
for 3 seconds until
, scroll to REGISTER and
.
to confirm. You will
Page 47
Please note
Handsets that were supplied with
your BT Studio 3500 base are already
registered to it as HS-1, HS-2 etc.
Each additional handset you buy must
be registered with the base.
IMPORTANT
Before registration, make sure the
handset batteries are fully charged
and that you are close to the base.
47