Using Your Phone; Switch The Handset Power On/Off; Make A Call; Preparatory Dialling - BT Studio 3500 User Manual

8474 Studio 3500 UG Iss2 [2]

Using your phone

Switch the handset power on/off

1. To switch off, press and hold
2. To switch the handset on, press and hold

Make a call

1. Press . When you hear the dial tone, dial the phone number.

Preparatory dialling

1. Enter the phone number first. The number is shown in
the display.
2. Press to dial the number.

End a call

1. Press , or place the handset back on the base/charger.

Receiving calls

1. When the phone rings, press
handset is on the base or charger, simply lift it to answer the call.
If you would rather press
a call, you will need to switch Auto-answer off, see page 42.
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
25/10/07 16:37
BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999
until the display goes off.
.
to answer the call, or if the
after lifting the handset to receive
Page 15
Dialling numbers quickly
Numbers can also be dialled direct
from the phonebook (page 20), the
calls list (page 25), or the redial list
(page 16).
If you make a mistake as you
enter the number, press
a digit.
Call timer
After the first 15 seconds of your call,
the call timer is displayed.
At the end of your call, the total
duration is not shown for 5 seconds.
Caller Display
If you have subscribed to your
network's Caller Display service, the
caller's number (or name, if an exact
number match is found in the
phonebook) will also be displayed,
see page 24.
15
to delete