Table of Contents
Advertisement
Custom Picture Settings
54
[Black] > [Master Pedestal]
The master pedestal increases or decreases the black level. Higher settings will make dark areas
brighter but decrease contrast. This setting can be adjusted from –50 to 50. (Default: ±0)
[Black] > [Master Black Red], [Master Black Blue]
These settings correct the color cast in blacks. Each can be adjusted from –50 to +50. (Default: ±0)
[Black Gamma]
Raises or lowers the lower part of the gamma curve (dark areas of the image). When [Gamma] is set to
[Wide DR] or [Canon Log], this setting has no effect on the picture. This setting can be adjusted from
–50 to 50. (Default: ±0)
[Knee]
Controls the upper part of the gamma curve (highlights of the image). By compressing the highlights,
you can prevent parts of the image from being overexposed. When [Gamma] is set to [EOS Std.],
[Wide DR] or [Canon Log], this setting has no effect on the picture.
[Activate]: Activates/deactivates the setting. (Default: [On])
[Slope]:
Determines the slope of the gamma curve above the knee point. This setting can be
adjusted from –35 to 50. (Default: ±0)
[Point]:
Sets the knee point of the gamma curve. This setting can be adjusted from 50 to 109.
(Default: 95)
Gamma
Normal 1
Normal 2/3/4
Normal 4
Normal 3
Normal 1/2
Input
Black Gamma
Input
Level
Level
Input
Normal 1
Wide DR
Canon Log
Advertisement
Table of Contents
