Adjusting Main Camera Functions With The Joystick - Canon ME200S-SH Instruction Manual

Adjusting Main Camera Functions with the Joystick

Adjusting Main Camera Functions with the Joystick
Using only the joystick, you can adjust the following main camera functions. Note that some of the
functions cannot be adjusted manually when the camera mode is set to [Auto].
• Camera mode (A 31)
• Aperture (A 33)
• Gain (A 36)
32
This section will explain the basics of how to adjust the functions. For specific details, refer to each
function's section.
1 Set the camera mode to [Manual] (A 31).
2 Close the menu and then press SET.
• One of the adjustable settings will be highlighted in orange on the screen.
• The display will return to normal if no operation is performed for about 6 seconds.
3 Push the joystick left/right to select the function you want to adjust.
4 Push the joystick up/down to select the desired option and then press SET.
• The desired option will be set and the display will return to normal.
NOTES
• The camera will automatically end the direct setting mode in the following cases.
- If no operation was performed for more than 6 seconds.
- If the MENU button or CANCEL button was pressed.
• Shutter speed (A 37)
• ND filter (A 38)
• White balance (A 39)