Table of Contents
Advertisement
Left side and center of the screen
Display
ABCDEFGHIJKLMNOP
AF, C. AF
CP1 to CP6, EOS, WDR, C.Log
Temp. (in red)
Fan (in red)
Lens (in red)
AWB, WB-A, WB-B, Dylt, Tung, Kelv
00000K, ±0
Auto, Manual
F0.0, Clsd
00.0dB
Right side of the screen
Display
Date/time
Gen.
Rec
1/0000
ND Off, ND 1/8, ND 1/64
IR
NOTES
• Press the CANCEL button to stop showing the camera's onscreen displays on the shooting screen;
press the button again to show all onscreen displays again.
• For external monitors that support only 480P or 576P input, connect the camera using the HDMI
OUT teminal.
• When the output signal is 480P or 576P, onscreen displays will not be superimposed on the video
signal.
• Onscreen displays will not be superimposed on the video signal output from the 3G/HD-SDI 2
terminal. To output onscreen displays, use the 3G/HD-SDI 1 / MONITOR terminal or HDMI OUT
terminal.
Description
Camera name (A 66).
Autofocus operation (A 43, 45).
• [AF] appears only while the one-shot AF function
is being used.
• When [C. AF] appears in red, continuous AF has
stopped working or cannot be used.
Currently selected custom picture file (A 52).
Temperature warning (A 67).
Fan warning (A 67).
Lens error warning (A 67).
White balance (A 39).
Camera mode (A 31).
Aperture value (A 33).
• [Clsd] (fully closed iris) appears only when a
compatible CINE-SERVO lens (A 71) is
attached to the camera.
Gain value (A 36).
Description
Date and time.
Genlock (A 59).
Recording command being output to an external
recorder (A 57).
Shutter speed (A 37).
ND filter setting (A 38).
Infrared mode (A 48).
Shooting Video
Custom Display
[Camera Name]
[Continuous AF]
([C. AF] display only)
[Custom Picture]
[Temperature Warning]
–
[Lens Error]
[White Balance]
[Camera Mode]
[Iris]
[Gain]
Custom Display
[Date/Time]
–
–
[Shutter Speed]
[ND Filter/Infrared]
[ND Filter/Infrared]
29
Advertisement
Table of Contents
