Table of Contents
Advertisement
Preparing the Camera
Installing the Camera
Depending on where you install the camera, you may want to use a commercially available tripod, pan/
tilt head, housing unit or other accessory. The camera is shipped with two TB-1 Tripod Adapter Bases
for tripods and accessories with 0.95 cm (3/8") screws. In addition, the camera body itself is equipped
with sockets for 0.64 cm (1/4") screws.
26
Socket for 0.64 cm
(1/4") screws
IMPORTANT
• You can mount the camera on a tripod or similar accessory but do not
use accessories with mounting screws longer than 5.5 mm (0.2 in.).
TB-1 Tripod Adapter Base for tripods
with 0.95 cm (3/8") screws
Socket for 0.64 cm (1/4") screws
for attaching a housing unit
TB-1 Tripod Adapter
Base for tripods with
0.95 cm (3/8") screws
5.5 mm
Advertisement
Table of Contents
