Table of Contents
Advertisement
Example Configuration
Example Configuration
The following example configuration illustrates how to connect the camera to external devices such as
a monitor (A 18) or video recorder (A 57).
RC-V100 Remote
Controller (optional)
14
RC-V100's
REMOTE A
terminal
External microphone
(commercially available)
Power cable
(commercially available)
External power
supply
NOTES
• If you plan on connecting the optional RC-V100 Remote Controller to the camera using the optional
RR-10 or RR-100 8-pin Remote Cable, check the serial number of the RC-V100. If the serial
number starts with "01 xxxx" (where xxxx represents other digits), you will need to update the
remote controller's firmware. Canon will perform this feature upgrade, and requires that the remote
controller be sent to an accredited Canon Service Center. Shipping and handling charges may
apply. Contact a Canon Customer Support Center for details.
• When connecting the optional RC-V100 Remote Controller to the camera, make sure that the
remote controller's terminal selection switch is set to match the terminal to be used on the camera.
Remote cable
(supplied with the
RC-V100)
External monitor
3G/HD-SDI
input
BNC cable
(commercially
available)
BNC cable
(commercially
available)
3G/HD-SDI
input
External recorder
Advertisement
Table of Contents
