Connecting To A Switchboard - BT PaperJet 50e User Manual

PaperJet 50e User Guide_se

Connecting to a switchboard

You can store the access code required to get an
outside line so that you only have to press the
EXTERNAL button.
With some switchboards you may also need to switch
your PaperJet 50E from TONE dialling to PULSE
dialling. Check with your switchboard manager or
supplier to see if this is necessary.
To set the dialling mode and access
number
While your PaperJet 50E is in standby mode
Press the Function button until the display
shows
Display shows
Display shows
Press until the display shows
(PBX)
Display shows
Press to switch between
Press to confirm. Display shows
EXT. LINE: PREFIX
10-06-2003 10:11 Pagina 37
INSTALLATION
TEL.LINE SET-UP
PUBL. LINE (PSTN)
PRIV. LINE
PBX DIAL: TONE
TONE and PULSE .
Press the < > buttons to display the options:
FLASH or PREFIX . If your access code is
recall choose FLASH . If your access code is a
digit(s) choose PREFIX .
Press Start to confirm your choice.
If you select PREFIX you are asked for the
code needed to get an outside line via your
switchboard (max. three digits).
Enter your code.
/
To confirm.
Display shows
PSTN DIAL: TONE
Press to switch between
settings to suit your switchboard.
To confirm.
To return to standby.
TONE and PULSE
37