BT PaperJet 50e User Manual page 18

PaperJet 50e User Guide_se
To dial using the handset
Place document face down in the document
feeder.
If necessary set the Contrast and
Resolution settings.
Pick up the handset and listen via the
earpiece.
Use the keypad to dial the number you want.
/
If the other person's fax machine is set up
for automatic reception, you hear the fax
tones, press the Start button and replace
the handset. Your fax is scanned and sent.
If your call is answered in person, ask them
to press the start button on their fax
machine. You will then hear their fax tones.
Press the Start button and replace the
handset. Your fax is scanned and sent.
When the fax has been sent, the display
shows
successful transmission.
To stop a fax being sent at any time, press the Stop
button.
To redial the last number
Press the Last Number button twice.
10-06-2003 10:08 Pagina 18
TX COMPLETED to confirm a
NOTE
Automatic re-dialling
If a fax fails to be sent, for example, the number
dialled was engaged, your PaperJet 50E will
automatically retry up to 3 times at 2 minute intervals.
If after all retries, the fax has not been sent, the
document will be deleted from memory (if using
MEMORY TX). You have the option of retaining
failed MEMORY TX faxes in memory to enable you
to try sending them again without re-scanning.
To do this you must enable the document
retransmission feature.
To switch document retransmission on/off
The default setting is off.
Press the Function button until display
shows FAX SETUP
Press the Start button. Display shows
DATE AND TIME
Press the Function button. Display shows
VARIOUS SETTINGS
Press the Start button until display shows
RETRANS.DOC: OFF
Press buttons to switch between ON and
OFF.
Press the Start button to confirm the option
displayed.
The machine returns to standby.
18