Table of Contents
Advertisement
PaperJet 50e User Guide_se
7
To set the date and time
When you connect the fax machine to the power
supply, and following any interruption in the supply you
will need to set the date and time as described below.
The display shows:
The display shows:
FORMAT: DD/MM/YY
If you want to select a different format from
the one displayed, press the b/c keys.
The display shows:
If you want to select the other time format
(12-hour), press the b/c keys.
The display shows:
DD/MM/YY
/
Enter the new date and time (e.g. 26-07-02;
12:00). As each digit is entered, the cursor
will move to the next one.
DD/MM/YY
If you only want to change a few digits,
move the cursor to them using the b/c
keys and overwrite them with the correct
digits.
To confirm the setting. The procedure for
setting the date and time is complete. The
new date and time will be updated
automatically and will be printed on each
page sent.
To return the fax machine to stand-by
mode.
10-06-2003
10:07
Pagina 12
DATE AND TIME
FORMAT: 24 H
HH:MM
01-01-02
00:00
HH:MM
26-07-02
12:00
NOTE
If you have selected the 12 hour clock the letter
a
from pm or
for am is displayed. To display the
p
a
correct
or
setting press the function button
when the cursor is flashing on the
clear button to delete entries.
NOTE
Remember that the stand-by mode is the status in
which it is idle and that it is the mode from which
the machine can be programmed.
p
p
a
or
. Press the
12
Advertisement
Table of Contents
