To Broadcast A Document - BT PaperJet 50e User Manual

PaperJet 50e User Guide_se

To broadcast a document

You can set your machine to send a document to up
10 different numbers (broadcasting).
See "To fax from memory" below.
To fax from memory
Your PaperJet 50E has a memory which lets
you store one document for sending at a
pre-set time.
Place document face down in the document
feeder.
If necessary set the Contrast and Resolution
settings.
Display shows
The document is scanned into the memory.
Display shows
If using the 12 hour clock, press the Function
button to switch between a for
Press the < > buttons to move the cursor.
Enter the time at which you want your fax
/
to be sent, e.g. 18.30 or press the Start
button to select the current time.
Display shows
Use the keypad to dial the number you
/
want.
PaperJet 50E user guide – Edition 3 – 29.8.00
1-07-2003 18:18 Pagina 20
TX FROM MEMORY
STORING then TYPE TIME
HH:MM
AM and p for PM .
TYPE FAX NUMBER
Display shows TYPE FAX NUMBER . If
required, enter the second number to which
you want to send your fax and press the
Start button again.
Repeat the last 2 steps until you have
entered all the numbers you want up to
maximum of 10 when the display will show
END OF LIST.
To finish.
To change, re-send or cancel a stored
document
When you have stored a document in the
memory for sending later:
Display shows
AUTOMATIC RX
MEMORY TX
Display shows
TX FROM MEMORY
Display shows
ALREADY ENTERED
Display shows
PRINT SETTING?
Press to switch between this and the other
Volume
two options CHANGE PARAM? or CANCEL
SETTING?
Press to select the option displayed.
PRINT – you get a print out of the fax
details and then the machine returns to
standby.
20