Cisco SPA 303 Manual page 18

forward all future incoming calls to.
b. If you selected No Answer, you will see that your phone number is
entered in the Contact field by default. By entering your own phone
number in this field, the phone will send callers to your voicemail
box if you do not answer. You may enter a number
forward all unanswered incoming calls to and how many rings
to wait before forwarding (one ring is approximately four
seconds). A value of 20sec is recommended.
c. If you selected Busy, you will see that your phone number is
entered in the Contact field by default. By entering your own phone
number in this field, the phone will send callers to your voicemail box if
your phone is busy. You may enter a number to forward all future
incoming calls to when all of your incoming lines are busy.
4. After you press cfwd soft key and enter the desired number you will see the
below idle screen.
"Calls Forwarded" Appears on the display and confirms call forwarding is
enabled.
To Disable Call Forwarding:
From the idle display, press the –cfwd soft key on the display.
The idle display returns, and the date and time are displayed.
Dynamic Forwarding
This Feature Is snot supported by the Cisco SPA 303
Enabling Do Not Disturb
Do Not Disturb prevents the phone from ringing and sends callers directly
to your voicemail box.
To enable Do Not Disturb: Press
the dnd soft key
To disable Do Not Disturb: Press
the – dnd soft key
18
to