Placing Calls To Contacts; Searching For Contacts - Cisco SPA 303 Manual

Placing Calls to Contacts

To place a call to a contact in the local contact directory use one of the two
methods below:
1. Press the dir soft key
2. Using the Arrow Pad select the contact you want to dial
3. Then Press the dial soft key
Or
1. From the idle screen press the
2. Select # 1 Directory by pressing the select soft key
3.Using the Arrow Pad select the contact you want to dial
4.Then Press the dial soft key

Searching for Contacts

To search for a contact in the local contact directory:
1. Press the dir soft key
2. Press # 2 , Search personal Directory using the select soft key
3. You will enter the contacts name using the Number pad
Use the 1/A/a soft key to select between numeric and up-
per/lower case alphanumeric modes.
Use * and # to access special characters in other language
4. Press the ok soft key once done
39