Pptp + Static Ip Or L2Tp + Static Ip Connection - D-Link DIR-300NRU User Manual
Wireless router with built-in 4-port switch
Hide thumbs
Also See for DIR-300NRU:
- User manual (93 pages) ,
- Quick installation manual (16 pages) ,
- Quick installation manual (28 pages)
Table of Contents
Advertisement
DIR-300NRU Wireless Router with Built-in 4-port Switch
User Manual
or
PPTP + Static IP
Fill in the IP Address and Netmask fields.
In the Gateway IP address field, enter the IP address of the gateway used by this WAN
connection.
In the Primary DNS server field, enter the address of the primary DNS server.
As a rule, the specified settings are enough to configure a non-protected connection of the selected
type. If you need to specify additional settings, open the expert settings mode. To do this, use the
switch in the bottom left corner of the page.
L2TP + Static IP Connection
Figure 39. Configuring PPTP + Static IP WAN connection.
Page 53 of 172
Configuring via Web-based Interface
Advertisement
Table of Contents
