D-Link DIR-300NRU User Manual page 97

DIR-300NRU Wireless Router with Built-in 4-port Switch
User Manual
Parameter
Encryption
Authentication
algorithm
MTU
Keep Alive
Extra options
Dial on demand
Static IP Address
PPP debug
IP received
Select a method of MPPE encryption.
No encrypt: MPPE encryption is not applied.
•
MPPE 40/128 bit: MPPE encryption with a 40-bit or 128-bit
•
key is applied.
MPPE 40 bit: MPPE encryption with a 40-bit key is applied.
•
MPPE 128 bit: MPPE encryption with a 128-bit key is
•
applied.
MPPE encryption can be applied only if the MS-CHAP, MS-
CHAP-V2, or AUTO value is selected from the Authentication
algorithm drop-down list.
Select a required authentication method from the drop-down list or
leave the AUTO value.
The maximum size of units transmitted by the interface.
Select the checkbox if you want the router to
the server even when the connection has been inactive for a
specified period of time. When the checkbox is selected, the LCP
interval and LCP fails fields are available. Specify the required
values.
Advanced options of the pppd daemon which need to be specified
for this connection. Optional.
Select the checkbox if you want the router to establish the
connection on demand. In the Maximum idle time field, specify a
period of inactivity (in seconds) after which the connection should
be terminated.
Fill in the field if you want to use a static IP address for this
connection.
Select the checkbox if you want to log
debugging.
The assigned IP address.
Page 97 of 172
Configuring via Web-based Interface
Description
keep you connected to
all data on PPP connection