Page 1
Applying WPA-PSK Encryption This document will detail how to setup WPA-PSK Encryption on the DIR-300. WPA-PSK is now considered to be the standard with encrypting a wireless network, it is far more secure then WEP and is therefore recommended. D-Link Technical Support –...
Page 2
NOTE: If you are going to change your Wireless Encryption, DO NOT perform this over a Wireless connection, connect your computer/laptop to a LAN Port. 2. Proceed to open an Internet Browser and login to the DIR-300 Web Configuration. NOTE: Instructions are on the Technical Support Knowledge Base if you are unsure on how to login to the Web Configuration.
Page 3
If you decide to change your Wireless Encryption password, you will need to remove your existing Wireless Profile or edit it to reflect the new changes. Please remember to ensure your DIR-300 has the most current firmware version applied. To apply this firmware please refer to the Technical Support Knowledge Base.