DIR-300NRU Wireless Router with Built-in 4-port Switch
User Manual
Figure 112. The page for adding a rule for remote management.
You can specify the following parameters:
Parameter
IP address
Mask
Protocol
Public port
Click the Change button.
To edit a rule for remote access, click the relevant link. On the opened page, change the needed
parameters and click the Change button.
To remove a rule for remote access, click the relevant link. On the opened page, click the Delete
button.
A host or a subnet to which the rule is applied. To choose a device
connected to the router's LAN at the moment, select the relevant
value from the drop-down list (the field will be filled in
automatically).
The mask of the subnet.
The protocol available for remote management of the router.
An external port of the router. You can specify only one port.
Page 144 of 172
Configuring via Web-based Interface
Description